user manual

SERVICE LEVEL: 2

Tools Required: 4 mm (5/32") Allen Key (provided), 10-mm wrench

SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY

1. Gently tip the chair on its back (Fig.1).

REMOVING THE FOOTREST ROD

1. Using a 10-mm wrench, turn the metal footrest rod nut

counter-clockwise to detach the rod from the spacer barrel,

then remove the rod from the chair frame.

2. Using the 4 mm (5/32") Allen Key (provided), remove the screw

from the top of the black plastic spacer barrel to detach the

spacer barrel from the bracket (Fig.2).

(Fig.2)

(Fig.1)

Footrest rod assembled

Spacer barrel

Footrest rod

*PC-085 shown

GET READY

June 5, 2009

REPLACING THE FOOTREST ROD

PC075/085/095

PAGE 1
June 5, 2009 *PC-085 shown PC-075/085/095 REPLACING THE FOOTREST ROD SERVICE LEVEL: 2 Tools Required: 4 mm (5/32") Allen Key (provided), 10-mm wrench SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY (Fig.1) Footrest rod assembled GET READY 1. Gently tip the chair on its back (Fig.1). REMOVING THE FOOTREST ROD 1. Using a 10-mm wrench, turn the metal footrest rod nut counter-clockwise to detach the rod from the spacer barrel, Spacer barrel then remove the rod from the chair frame. 2.
PAGE 2
INSTALLING THE NEW FOOTREST ROD Screw 1. Remove the screw from the top of the black plastic spacer barrel (Fig.3). 2. Align the spacer barrel with the corresponding hole on the bracket, then secure it using the screw Bracket you removed in the previous step and the 4 mm (5/32") Allen Key (Fig.4). 3. From below the chair frame, insert the metal rod through the corresponding hole in the chair Spacer barrel frame then into the black spacer barrel (Fig.4). 4.