pc 095 humantouch.com 800.355.2762 ©2009 Human Touch®, LLC. Patents pending and intellectual property rights enforced. No medical claims are warranted or implied by the use of this product. Human Touch is a trademark of Human Touch®, LLC.
keep it safe IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER: To reduce the risk of electrical shock Always unplug this product from the electrical outlet immediately after using and before cleaning.
Your Human Touch Perfect Chair requires some simple assembly. Just attach the headrest frame, pads, arm core/caps, and head pillow, and you’re done! get ready ATTACH THE HEADREST FRAME UNPACK THE BOXES 1. Raise the chair to an upright position For your convenience, and to better position the chair for the remaining assembly, plug in the chair, then use the electric recline lever to adjust the chair to an upright position. Body pad Arm cap (2) Phillips-head screwdriver 2.
get ready ATTACH THE HEAD PAD ATTACH THE ARM CORE AND CAPS 1. Slide the head sock over the headrest frame 1. Attach the right-hand arm core Slide the head sock over the headrest frame, as far as it will go. The padded side of the head sock should face the back of the chair. Remove the four screws taped to the top of the right-hand arm, then place the arm core on top of the mounting plate. Secure the arm core using the four screws and the Allen key (provided). 2.
Using your Human Touch Perfect Chair is easy. Just take a seat and adjust the chair to the desired position. The Perfect Chair cradles you in zero-gravity comfort, with your feet above your heart—the ultimate neutral-posture position for back and spine relief. take a seat 1. Adjust the recline angle 3. Getting out of the perfect chair Before adjusting the recline angle, be sure there is nothing located directly behind or beneath the chair.
care and maintenance To keep your product working and looking its best, please follow these simple care guidelines. Specifications* Operating Voltage: 220-240V~ 50/60Hz Power Consumption: 150 Watts Chair Size (reclined): 157.5cm L x 81.3cm W x 76.2cm H (62” L x 32” W x 30” H) Cleaning: 1. Be sure to disconnect the power cord from the electrical outlet before cleaning. 2. Do not use benzene, thinner or any other solvents on your chair. 3. Remove dust on the backrest or arm with a vacuum. 4.