Indoor Furnishings User Manual

humantouch.com
4
5
get ready
Your Human Touch Perfect Chair requires some simple
assembly. Just attach the headrest frame, pads, arm
core/caps, and head pillow, and you’re done!
5
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame
2. Secure the body pad
1. Raise the chair to an upright position
ATTACH THE HEADREST FRAME
For your convenience, and to better position the chair for the remaining assembly,
plug in the chair, then use the electric recline lever to adjust the chair to an upright position.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
Withthearcoftheheadrestframepointingtowardthebackofthechair,
slide the two ends of the headrest frame into the open tube ends at the
top of the backrest frame.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
2. Remove the headrest frame screws
3. Insert the headrest frame into the backrest frame
4. Replace the headrest frame screws
UNPACK THE BOXES
Chair frame
Headrest frame
Head sock Armcore
Body pad Armcap(2)
Head pad Head pillow
3/16-inch
Allenkey
Phillips-head
screwdriver
Lumbar pillow
Some pad sets include a separate
lumbar pillow instead of the upgraded
body pad with built-in lumbar support.