Installation User guide

Keyboard

System

Installation

Instructions

For use with all Humanscale

Keyboard Systems.

www.humanscale.com

Keyboard mechanism (1)

Track (1)

Keyboard platform (1)

Rubber stopper (1)

Front bumper (1)

5/8” round head screws (12)

5/8” ﬂat head screws (2)

1/2” ﬂat head screws (2)

Hex nuts (4)

Keyboard cord clips (3)

Mouse cord clip (1)

PACKAGE CONTENTS

HSIKB0709

PAGE 1
Keyboard System Installation Instructions PACKAGE CONTENTS Keyboard mechanism (1) Track (1) Keyboard platform (1) Rubber stopper (1) Front bumper (1) 5/8” round head screws (12) 5/8” flat head screws (2) 1/2” flat head screws (2) Hex nuts (4) Keyboard cord clips (3) www.humanscale.com Mouse cord clip (1) HSIKB0709 For use with all Humanscale Keyboard Systems.
PAGE 2
5/8” Flat head screws (2) (blue) 1/2” Flat head screws (2) (red) Mounting tape Track 1/2”Back from edge Keyboard mechanism Keyboard platform Glides Rear rubber stopper 5/8” Round head screws (1) STEP 1: Using tape, affix track to underside of desk. Using tapping screws, attach track and rear rubber stopper. 5/8” Round head screws (8) STEP 2: Making sure plastic glides are in place, slide mechanism into track. Attach front bumper to track.