Operation Manual

Registering a new handset
Up to 5 base stations can be registered on a
base station. You can then also make inter-
nal telephone calls between the handsets.
You can also forward incoming calls to other
handsets.
You can register up to 4 base stations on
each handset. This increases the range of
the telephone so that you can move bet-
ween the telephone transmission areas.
To register a new handset, proceed as fol-
lows:
1. Press and hold the „MT-Search“-button
, located at the underside of the
base, for approximately 5 seconds.
2. Press the key “Menu” and select the
entry “Registration” with .
3. Now press “Select”.
4. With select the preferred base and
conrm with “Select”. The base station is
now located and the handset is registe-
red.
5. Now enter the PIN code (default is
0000).
6. If the PIN code is accepted, a log-on
tone sounds and the base assigns a
number to the handset. If the PIN code is
incorrect, a warning tone sounds and the
handset returns to the previous regist-
ration status. You can re-enter the PIN
code.
Internal calls
If you have registered several handsets to a
base, you can hold internal calls, and con-
nect external calls between the handsets.
To make an internal call, proceed as follows:
1. Press the key on the handset.
2. Enter the desired handset number from
1 to 5. With 9, all handsets are called.
If you enter a wrong number, the handset
will give a warning tone.
When you receive an internal call, the num-
ber of the calling handset will be shown on
the display.
Connecting calls between handsets
An external call can be forwarded from one
handset to another.
Proceed as follows:
1. Press the
key on the handset
during the call. The external caller is put
on hold.
2. Enter the desired handset number from
1 to 5.
3. The dialled handset will ring. The number
of the calling handset will be shown on
the display.
4. Answer the call with .
5. If you like, you can now speak with the
selected user. You can now hang up
before the user accepts the call, and the
call is then directly forwarded.
6. Press the key to end the call. The
caller on hold is automatically forwarded
to the other caller.
To cancel the transfer, press the key
again and you can speak with the external
caller again.
If the selected handset is not answered
within a certain time, the call is reset.
6 English