Operation Guide

10
© Copyright 2019 HUMAX. All rights reserved.
The information and specifications included are subject to change without notice.
CHAPTER 3
3. Hardware Gateway Installation
A BGW320-500 XGS-PON Broadband Gateway cabling overview, as well as rear panel illustration, is
provided below. Also provided are procedures to perform BGW320-500 XGS-PON Broadband
Gateway connections for the power adapter, optic module, wired Ethernet, wireless devices, Internet,
and analog telephone.
The following diagram illustrates BGW320-500 XGS-PON Broadband Gateway connections to the
Internet using DSL Broadband. Phone and power adapter connections are also illustrated.
BGW320-500 XGS-PON Broadband Gateway Cabling Overview
Warning: Use only the power supply and cord that came with this device.
Failure to use the authorized power supply and cord may cause electric
shock, fire, bodily injury, and/or property damage.
Warning: Use only the optic
module that came with this device.
Failure to use the authorized optic
module may cause disconnection
of network.
Fiber Cable
Power Outlet
Fiber Outlet
Power Adapter
Optic Module
Phone Cable
Voice Splitter
Wi-Fi
Ethernet Cable
Phone Cable
Connection
Phone Cable
Connection
5Gbps Wired
Connection
1Gbps Wired
Connection
Alternatively, you can connect the BGW320-500 XGS-PON Broadband Gateway to the Internet using the WAN Ethernet port
labeled ONT. See Connecting the BGW320-500 XGS-PON Broadband Gateway to the Internet (page 14) for the detailed
procedures regarding this setup.
BGW320-500 XGS-PON Broadband Gateway Release 1.0
Install and Operation Guide