Operation Guide

The information and specifications included are subject to change without notice.

Connecting a Computer to a Ethernet Port of the BGW320-500

XGS-PON Broadband Gateway

After the gateway recognizes the computer, the Ethernet LED or 5G Ethernet LED turns steady green

when the computer starts transferring data with the gateway. See Status Indicator Lights (page 18)

under Basic Troubleshooting for all Ethernet light indications.

1G bpsEthernet Cable (Cat-5e) Connection.

5G bpsEthernet Cable (Cat-7) Connection.

3-2-2. Connecting Devices Using Wi-Fi

The BGW320-500 XGS-PON Broadband Gateway has an integrated Wi-Fi access point to which users

can use to connect Wi-Fi devices. By default, the BGW320-500 XGS-PON Broadband Gateway is

configured with a Wi-Fi network name (SSID) and is WPA-PSK/WPA2-PSK security enabled.

To connect a Wi-Fi device:

 On the Wi-Fi device, view the available Wi-Fi networks. The specifics of how you do this depend on

the device to which you are connecting. The default Wi-Fi network name (SSID) and the Wi-Fi

password (e.g., encryption key) are printed on both Removable label and Back Panel label of the

BGW320-500 XGS-PON Broadband Gateway. Select the appropriate Wi-Fi network name and

connect.

 At the prompt, enter the Wi-Fi password.

To simplify Wi-Fi device connection to the BGW320-500 XGS-PON Broadband Gateway:

You can configure Wi-Fi Protected Setup (WPS) to the network using the PUSH method.

BGW320-500 Removable Label

BGW320-500 Back Panel Label

BGW320-500 XGS-PON Broadband Gateway Release 1.0

Install and Operation Guide

NOTE : Download “Smart Home Manager”

App. by scanning QR code in Removable

Label.

NOTE : Scan the QR code in back panel

label after download “Smart Home

Manager App”.