Operation Guide

20
© Copyright 2019 HUMAX. All rights reserved.
The information and specifications included are subject to change without notice.
BGW320-500 XGS-PON Broadband Gateway Release 1.0
Install and Operation Guide
Conditions for LED
Behavior
S ervice LED WPS LED
Power
Jack LED
Ethernet &
O NT LED
Notes & Light mean
Reset Button First
Pressed
Last known
setting
Last
known
setting
S olid
Green
So lid Green if
connected
device
 Maximum delay allowed (up to 1s) before indicators start flashing
during which the Service LED would be displaying its prior color/state.
Reset Button held
for less than 5s -
S tandard reset
Red/
F a st Flash
Red/
Fa st
Flash
S olid
Green
So lid Green if
connected
device
 Indicators flash for minimum of additional 5s from the time the
button is released.
 Service LED won’t move to solid white and other LEDs won’t be off.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.
Reset Button held
for 5s – 10s
S tandard reset while
held
Red/
F a st Flash
Red/
Fa st
Flash
S olid
Green
So lid Green if
connected
device
 Indicators flash red until the button is held.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.
Reset Button held
for 5s – 10s
S tandard reset after
release
S olid White O ff
S olid
Green
So lid Green if
connected
device
 Service LED would be solid white and other LEDs off for minimum of
5s after the button is released.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.
Reset Button held
for 10s - 15s -
Factory reset - While
Held
White/
F a st Flash
Green/
Fa st
Flash
S olid
Green
So lid Green if
connected
device
 Indicators flash red for first 10 and, flash as shown here for the next
5s.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event
Reset Button held
for 10s - 15s -
F a ctory reset - After
release, next 5
seconds
White/
F a st Flash
Green/
Fa st
Flash
S olid
Green
So lid Green if
connected
device
 Indicators flash red for first 10 s and, flash as shown here for the next
5s.
 Flashes for additional X seconds after 15 seconds.
 Whereas X = 15 - time of button release
 Service LED won’t move to solid white and other LEDs won’t be off.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.
Reset Button held
for longer than 15s -
Factory reset - While
Held
S olid White Off
S olid
Green
So lid Green if
connected
device
 Indicators flash red for first 10 s. For the next 5s, Service LED flashes
white and WPS LED flashes green.
 Service LED turns to solid white and other LEDs turned off after 15s.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.
Reset Button held
for longer than 20s -
Factory reset - While
Held
S olid White O ff
S olid
Green
S olid Green
if
connected
device
 Indicators flash red for first 10 s. For the next 5s, Service LED flashes
white and WPS LED flashes green.
 Service LED turns to solid white and other LEDs turned off after 15s.
 Ethernet LED: No change on button press event. Solid-Green for
Ethernet connected ports for 5 seconds after release event.