Digi-tv-vastaanotin maanpäällisille lähetyksille Mottagare för marksänd digital-TV Set-Top-Box for terrestrial reception Suomi- Käyttöopas Svensk- Bruksanvisning English- User manual CI-5100T
Safety............................................................... .............. EN2 Copyright......................................................... .............. EN3 Glossary .......................................................... .............. EN3 Reference ........................................................ .............. EN4 Front Panel & Connections Front panel ....................................................... .............. EN5 Connectors on the rear panel.......................
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 190 - 250V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus.
English Copyright & Glossary Trademark • VIACCESS™ is a trademark of France Telecom. • CryptoWorks™ is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of KUNDELSKI S.A. • Conax is a trademark of Telenor Conax AS. • “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial softeware.
Software Software Upgrade Humax digital set-top box is a highly sophisticated product - incorporating one of the best software applications avalable. Whenever a problem is found with this software or, in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded. In order to maintain proper performance of the product, it is essential to have the most up to date software. The latest news and release of software versions may be found at Humax website http://www.
English Front & Rear Panel Front Panel 8 1 TV INDICATOR (GREEN) The indicator lights on in TV mode. 2 RADIO INDICATOR (GREEN) The indicator lights on in radio mode. 3 DISPLAY Shows service number, error messages, RCU commands and time in Standby mode. 4 STANDBY INDICATOR (RED) Indicates that the STB is under standby. 5 STANDBY Press to switch between Operation and Standby modes. 6 TV/RADIO Press to switch between TV and Radio modes. 7 Use to change services down/up.
Front & Rear Panel Connectors on the rear panel 1 RS-232C Use it when connecting to your PC. 2 TV SCART For the audio/video input of the TV. 3 VCR SCART For the VCR. 4 AUDIO L/R + VIDEO Audio/video signal from your STB to Audio system, VCR or TV. 5 ANTENNA Use to connect a general Aerial Antenna and CABLE jacks to a ANTENNA input jack on the STB. 6 TV/VCR Use to connect a RF signal from your STB to RF(ANT) input jack on your TV or VCR .
English Connect General Picture and sound Digital TV is a transmission technology that replaces the traditional analogue technique. This means that several TV channels, radio channels and other digital services can be transmitted on the same space as just one channel took up before.
Connect TV & other equipment Example 1 In this example a TV set is connected to the digital receiver. If possible the TV should be connected with the digital receiver through a Scart cable. If the TV doesn’t have a Scart connection or if you want to connect a second TV to the digital receiver, the UHF output of the modulator may be used. ANTENNA (Se also page EN6 and EN24) TV/VCR Example 2 In example 2 a VCR and a hifi stereo components system are connected to the digital receiver in addition to the TV.
English Example 3 In this example the terrestrial digital receiver is operated together with the satellite receiver. Both of the receivers should be connected through a Scart cable. Plug the Scart cable of the satellite receiver into the VCR Scart of the DVB-T receiver. As soon as the satellite receiver is turned on, its audio and video signals will be looped through the terrestrial digital receiver. ANTENNA TV/VCR Example 4 This pattern corresponds to example 3 (see above).
Remote Control Unit STANDBY NUMERIC BUTTONS TV/DTV TV/RADIO MUTE INFORMATION (RED) SOUNDTRACK (GREEN) SUBTITLE (YELLOW) MENU UHF (BLUE) CURSOR TIME (WHITE) OK EXIT V+/V- P+/PHELP EPG RCL (Recall) EN10
English 1 NUMERIC BUTTONS Press to select a service, enter your PIN Code or numeric on the menu. 2 INFORMATION (RED) Press to display the programme information box on the screen. And this button functions same as the RED button on the menus. 3 SOUNDTRACK (GREEN) Press to display the soundtrack list for the current service. And this button functions same as the GREEN button on the menus. 4 SUBTITLE (YELLOW) Press to display the subtitle language list for the current service.
Daily Use Changing channel All You can select channel in the following way: 6 TV4 7 CNN 8 Mediteve 9 Boxer 10 Canal+ 11 Canal+ Gul 12 Canal+ Blå 13 MTV Nordic 14 DTU7 15 Kanal 5 (0~9) : Select desired channel directly using the numeric keys. : Select channels step by step, up or down. : Select channels step by step, up or down. (only func tional in picture mode without menus on the screen) : Jump between present and previously viewed channel. : Select a channel via the electronic programme guide.
English Volyme Control Use the volume keys to adjust the volume level. Optional keys to adjust volume level (is only working in pure picture mode without any menus on the screen). To temporarily stop the volume, press the Mute button. To cancel mute, press the Mute button again or press any of the volume buttons. Soundtrack When you want to change the audio language of current service, press the Green button firstly. The on-screen menu is displayed on the top to left side of the screen.
Daily Use Information box (i-plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button ( ) or changing services. i-Plate is divided into service part and event part. i 14:48 Nyheter från SVT24 (12:10 - 16:00) SVT24 5 SERVICE-PART (Left side of the box) SERVICE PART consists of the following items: • i-Plate icon, Current time and Dolby Digital symbol. • Service name, Service number, ( ) icons. • Subtitle, Teletext, Scrambling service symbol.
English Settings & Functions Main Menu Main Menu Select Service TV Guide Parental Control Installation Utility The Main Menu consists of the bellow grouped function setting options. Detailed description of each function is described on the following pages: EN16 till EN33. 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. (Se page EN 16 and also page EN 12) 2.
Settings & Functions 1. Select Service All To select the desired in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: 6 TV4 7 CNN 8 Mediteve 9 Boxer 10 Canal+ 11 Canal+ Gul 12 Canal+ Blå 13 MTV Nordic 14 DTU7 15 Kanal 5 Simple Service List 1. Select “Select Service” from the Main Menu and press the 2.
English Service Network Favourite All Sveriges T.. TV4 AB Cell ICD AB Boxer TV A.. Canal+ Tele.. Kanal 5 AB Network Genre Alphabet 1 SVT1 2 SVT2 3 SVT24 4 SVT Extra ) button on the remote control unit to 1. Press the Yellow ( select the Network service list. 2. Press the Yellow ( 1 SVT1 etc Note : ) button to toggle provider and service list. 1. The provider name is displayed on the left window and the provider’s services are displayed on the right window. 2.
Settings & Functions You can watch a programme being shown and reserve it in the TV Guide mode. 11 Canal+ Gul (14:30 - 15:30) Fotboll: Elitserien 12 Canal+ Blå 2.
English 15:37 Wed 26 JUN TV Guide - Weekly Today Thu Fri Sat Sun Mon Tue Wed 13 MTV Nordic 15:00 - 15:30 Spring Break Weekly mode Shows the information of programmes that will be played for a buttons. week. Select a day you want using the To watch and reserve a programme you want, do the same steps as with the NOW/NEXT mode.
Settings & Functions 3. Parental Control Main Menu You can set a parental guidance rating to each programme in this mode. Select Service TV Guide Parental Control Installation Utility button is pressed after selecting the highlighted 1. When the parental control on the initial menu screen, a display window for entering the PIN Code will appear on the centre of screen. ** The default PIN Code is 0 0 0 0 . _ PIN _ code __ 2. Enter the PIN Code on the display window.
English Language Setting System Setting Select the language for menu, audio or subtitle. Language Setting Time Setting A/V Output Setting UHF Tuning Other Setting 1. Select the highlighted language setting using the buttons button. in the system setting mode and then press the 2. Select the highlighted Menu(or Audio, Subtitle) Language and buttons and the language list will be displayed. press the ? buttons to move to a language you want and then button to finish.
Settings & Functions Time Setting You can set the Current Time and Wakeup Time in this mode. Time Setting Currrent Time 09:09 Time Offset : GMT +00:00 Timer Disabled Timer Mode Once Wakeup Time Disabled Wakeup Service No. TV 20 Service Name : MTV .. Sleep Time Disabled Furthermore, the Service Number in the Wakeup mode and Sleep Time (standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting.
English A/V Output Setting A/V Output Setting Video Output Audio Output Dolby Digital Screen Mode Display Format RGB STEREO OFF 4:3 Letter-box Video Output (CVBS/S-Video/RGB) Select one of the following options: RGB - if you have connected a scart cable to a standard TV. CVBS - if you have connected a scart cable to an old TV that do not have RGB-input. ? S-Video - if you have connected to the S-video (SVHS) input on your TV or VCR.
Settings & Functions UHF Tuning UHF Tuning Channel PAL Standard Offset How to set the UHF-modulator if your receiver is connected to the TV with a TV cord. 43 PAL-G 0 Channel ? Select a proper output channel that will not be interfered by other TV-transmissions or other surrounding equipment that make use of a UHF-modulator (VCR, DVD, TV-game etc.) The range of channels and frequency value are different for each PAL Standard.
English 4-2. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks. ** The default PIN Code is 0000 . Organise TV Services Service Organising Organise TV Services Organise Radio Services Organise Networks Organise All Services This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. - Use the arrow buttons to move around and select channels in the list. ? - Use the OK button to confirm.
Settings & Functions Rename • Press the White ( ) button to change the service name. Then, the keyboard image will be displayed on the screen. : Use the arrow buttons to select characters on the keyboard. : Use the OK button to confirm selected character. : RED button for "standard"-keyboard. : GREEN key for an extended keyboard. : YELLOW key to save the new name. : BLUE key to erase characters. Organise Favourite A-D Organise Favourite TV Services Gr.
English Organise Service Genre Organise Genre of TV Services Services Movie 10 Canal+ 11 Canal+ Gul 12 Canal+ Blå etc etc etc etc etc etc etc etc etc etc Delete Lock 3 4 5 6 7 8 9 13 14 15 The Organise Service Genre feature allows the user to Delete/ Lock/Skip/Rename a service in the selected Genre. SVT24 SVT Extra Skånekanalen TV4 CNN Mediteve Boxer MTV Nordic DTU7 Kanal 5 Skip Rename Available genre: ? Movie, News, Show, Sports, Children, Music, Art, Education, etc.
Settings & Functions Organise Radio Services Organise Radio Services The Organise Radio Services functions same as TV Services except that it uses Radio Services. Organise All Services Organise Favourite A-D Organise Service Genre You can delete or move Radio Services and change the attributes of them. ? Organise All Services The Organise All Services lets the user Delete, Move, Lock, Skip or Rename Radio services on the All Radio services list.
English 4-3. Service Searching Service Searching A service is transmitted in a transport stream. To watch the service, all services in the transport stream should be searched and stored in this menu. The proper information to search the stream is provided by the network operator. Please contact your installer or the network operator. Easy Search Custom Search Automatic Search Default Search ? 0000 .
Settings & Functions Custom Search The menu, “Custom Search” operates similar as the menu “Easy Search”, however more parameters are required to search the services. Select proper items as follows. To get proper information, please contact your installer or the network operator. Service Searching Easy Search Custom Search Automatic Search Default Search ? Mode Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto” by buttons.
English Automatic Search Automatic Search Start Channel End Channel The menu “Automatic Search” is the easiest method to store new stations. Proceed as follows in order to start the Automatic Search: CH 21 CH 69 Start Channel Set the lowest UHF channel in your area by using the buttons. ? Press the Automatic Search button to start the search. End Channel CH 21 8K FFT Enter the highest UHF channel by using the Press the buttons. button to start the search.
Settings & Functions 4-4. Status STB Status STB Status H/W Version S/W Version Device Driver Version S/W Last Update Loader Version System ID Current Service CI SLOT 1 CI SLOT 2 Displays the information of H/W Version, S/W Version, Loader Version and CI CAM of STB and so on. OAK 1.1 HTCI 1.05.03 HTCI 1.05.03 10 MAY 2002 L 9.01 001B.
English 4-5. Common Interface Common Interface You can enjoy not only scrambled services using the Conditional Access Modules (CAM), but also Free-To-Air services. Slot 1. Viaccess Slot 2. CI module is not installed This STB currently supports six kinds of CAM (VIACCESS™, Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard). ? Common Interface module and Smart Card depend on the service provider. If you need CAM, contact your service provider or distributor.
Menu Map EN34
EN35 English
Troubleshooting Guide • If you can't solve the problem referring to this Troubleshooting Guide, contact us via our homepage: http://www.humaxdigital.
English Specifications Conditional Access Interface PCMCIA 2 Slot Common Interface Tuner & Channel Input Connector Input Impedance Input Channel Input RF Power Level Demodulation Mode FEC Decode Guard Interval IEC 169-2, Female 75Ω CH21 ~ CH69 -70dBm ~ -20dBm OFDM 2K, 8K and Auto 1/2, 2/3, 3/4, 5/6, 7/8 and Auto 1/4, 1/8, 1/16, 1/32 and Auto MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode Sampling MPEG-2 ISO/IEC 13818
Specifications A/V & Data In/Out TV SCART VCR SCART VIDEO AUDIO R/L S/PDIF RS-232C Video Output (CVBS, S-Video, RGB) Audio Output (Resolution : 20 bits DAC, Max. 2 Vrms) Video Output(CVBS)Video Input(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 1 Vrms(fixed) RCA/Cinch, Video Output(CVBS) RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max. 2 Vrms) Digital Audio Output, Fiber-Optic (Resolution : 20 bits) Transfer rate Max.
020911CI5100T_Fi_Sw_En
