Personal Video Recorder Personlig digital videospelare CONAX embedded Inbyggd CONAX CXC-2000PVR User's Manual Användarhandbok
** ** ** ** ** Notice ** Copyright (Copyright © 2001 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty The information in this document is subject to change without notice. HUMAX does not have any responsibility for direct, indirect, accidental, necessary and other damage due to your offer or use of the information contained in this manual.
** ** ** ** ** Notice ** Read this manual carefully and make sure you understand the provided instructions. For your safety, check what the result each action will be. Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. ** • Warning Indicates a hazardous situation which, if not avoided, could result in (serious) injury.
** ** ** ** ** Safety and Warning ** This Personal Video Recorder has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY ** 90 - 250V AC 50/60Hz Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company.
** ** ** ** ** Safety and Warning ** 9. LIGHTNING, STORM, or NOT IN USE ** Unplug the product from the wall outlet and disconnect the cable during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. ** 10. EXTRANEOUS OBJECTS ** Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts ** 11.
** ** ** ** ** Contents ** 1. Before Using the Recorder GB8 ** 1.1 Package Contents GB8 1.2 Front Panel GB9 1.3 Rear Panel GB10 1.4 Conditional Access GB11 1.5 Remote Control Unit GB12 2. Setup GB14 ** 2.1 Connecting the Cable GB14 2.2 Powering On GB17 GB18 3. Installation Wizard ** ** 3.1 Language GB18 3.2 Area Setting GB18 3.3 Channel Search GB19 3.4 Time Setting GB20 3.5 Result GB20 4. Basic Operation GB21 ** ** 4.1 Switching Channel GB21 4.
** ** ** ** ** Contents ** 6. Recording and Playback GB31 ** 6.1 Instant Recording GB31 6.2 Recording Reservation GB31 6.3 Programme Playback GB33 6.4 Editing Recorded Programmes GB33 6.5 Checking Hard Disk Drive GB35 GB36 7. Channel List ** 7.1 Displaying and Switching Channel List GB36 7.2 Changing Channel List Group GB37 7.3 Edit Channels GB38 7.4 Edit Favourite Channels GB40 7.5 Channel Change Mode GB43 8. Programme Guide GB44 ** ** 8.
** ** ** ** ** ** ** 10. Installation GB59 ** 10.1 Channel Search GB59 10.2 Linear Search GB62 10.3 Default Setting GB64 11. Software Update GB65 ** 11.1 OTA (Over the Air) GB65 12. System Information GB68 ** 12.1 Status GB68 12.2 Signal Detection GB68 12.3 Conditional Access (for Conax embedded) GB69 13. Games GB70 14. Menu Map GB71 15. Troubleshooting GB72 ** 15.1 Troubleshooting GB72 15.2 Error Message ** GB73 16. Specification ** GB74 17. Glossary GB76 18.
** ** ** ** ** 1. Before Using the Recorder ** This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. ** ** Remote Control Unit ** Batteries ** User's Manual ** ** ** SCART Cable ** RF Cable ** ** Note: Since faults may occur if the remote controller is being left without a battery for a long time, always keep the battery inserted in the remote controller.
** ** ** ** ** ** ** 1.2 Front Panel ** ** 1. STANDBY LED Red light is displayed when the product is in the standby mode. ** ** ** ** 2. RECORD LED Green light is displayed when the product is in recording. ** ** 3. RADIO LED Yellow light is displayed when the recorder is in radio mode. ** ** 4. STANDBY Button Switches between operation and standby modes. ** ** 5. TV/RADIO Button Switches between TV and Radio. ** ** 6. CH - / CH + Moves the TV/Radio channel up/down. ** ** 7.
** ** ** ** ** 1. Before Using the Recorder ** 1.3 Rear Panel ** ** 1. CABLE IN Connects a cable to a CABLE input jack on the Recorder. ** ** 2. TV/VCR Connects a RF signal from your recorder to RF(ANT) input jack on your TV or VCR. ** ** 3. TV SCART Connects a TV SCART cable. ** ** ** ** 4. VCR SCART Connects a VCR SCART cable. ** ** 5. S/PDIF Outputs the digital audio signals. ** ** 6. VIDEO Connects to your TV or VCR and output Video signals. ** ** 7.
** ** ** ** ** ** ** 1.4 Conditional Access Although some TV and Radio channels are free to air, most TV and Radio/Music channels are available on a subscription basis and can only be enjoyed via Conditional Access component. The Conditional Access component is removable Smartcard. ** Inserting Smartcard ** A Smartcard looks similar to a credit card and entitles you to view and listen to all the channels you choose to subscribe to.
** ** ** ** ** 1. Before Using the Recorder ** 1.
** ** ** ** ** ** ** 1. SOURCE Selects the input source between TV and recorder. 11. PLAYBACK CONTROL BUTTONS Includes fast rewind, play, fast forward, record, stop, pause buttons. ** ** ** ** 2. TV/RADIO Switches between TV and Radio modes. 12. STANDBY Switches between Operation and Standby modes. ** ** ** 3. NUMERICAL (0~9) BUTTONS Enters a TV/Radio channel number or menu option number. ** ** 13. GUIDE Displays the Programme Guide. ** ** ** 4. LIST Displays the channel list. 14.
** ** ** ** ** 2. Setup ** This chapter describes how to set up the Recorder. Select the most appropriate procedure depending on your requirements. Note: If you encounter any problem when setting up the Recorder, please contact your local product distributor. 2.1 Connecting the Cable 1. Connecting TV This is the most simple setup mode. ** ** ** ** ** ** ** • Connect your CATV line to the CABLE IN socket on the Recorder for receiving cable services.
** ** ** ** ** ** ** 2. Connecting TV/VCR with 2 SCARTs This is the optimal way to connect the Recorder.
** ** ** ** ** 2. Setup ** 3. Connecting Hi-Fi system If you wish to connect S/PDIF to the optical S/PDIF terminal and Dolby digital decoder to listen digital audio, connect as following.
** ** ** ** ** ** ** 2.2 Powering On 1. Connect the power cord of the recorder to a wall outlet. 2. Turn on the power switch, located at the left on the back of the recorder. Make sure that the Standby LED indicator is turned on Red. ** ** 3. Power on by pressing the STANDBY ** button at Remote Controller.
** ** ** ** ** 3. Installation Wizard ** When powering on your product for the first time after purchasing, the Installation Wizard is automatically started. You can easily set-up using simple organisation and options, and watch the broadcasting after completing the set-up procedure. You can select items using the NUMERICAL (0-9) button. button or select Back and press the OK Note: If you press the BACK running the Installation Wizard, you can return to the previous screen. button while 3.
** ** ** ** ** ** ** 3.3 Channel Search You can set parameters to search channels. Select the following item using the button, and press the OK • Frequency: The default value is set to 362000. If you wish to set your desired frequency value, select User Define, and enter the value using the NUMERICAL (0~9) button. • Symbol Rate: The default value is set to 6875. Select your desired symbol rate using the button, and or button.
** ** ** ** ** 3. Installation Wizard ** 3.4 Time Setting You can set the current time. Press the OK Offset. or button to display the values for GMT Select the appropriate GMT Offset value using the button to set the current time. and press the OK button Note: The default item is Auto. If GMT Offset is Auto, it is automatically set depending on your country. However, if the time is NOT set properly, you can change GMT Offset to fit your local time. Select Next using the to go to the next step.
** ** ** ** ** 4. Basic Operation ** This chapter describes functions such as switching channel, volume control, and basic features for watching programmes. 4.1 Switching Channel You can switch the current channel using one of the following methods. 1. Press the CH-/CH+ or buttons. 2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the channel directly. button to switch between TV channel and Radio channel. 3.
** ** ** ** ** 4. Basic Operation ** Teletext Functions Index Return to index page. If there is no index page, jump to page 100. Sub-page Search the sub-page using the sub-code written by users. If it’s not in the teletext mode, display the current time. MIX Adjusts transparency of teletext screen. Cancel Hides the teletext except page number. Reveal Displays the concealed information. Double Size Displays the text size as double size. Page Hold Holds the current page not updating it. 2.
** ** ** ** ** ** ** 4.4 Changing the Subtitle Language If the current programme provides Subtitle information, you can select the language for the Subtitle. 1. Press the SUBTITLE language list. button to display the subtitle 2. Select your desired subtitle language using the button, and press the OK button. Then the subtitle will be displayed in the selected language at the bottom of the screen. 3. Select OFF from the subtitle language list not to display subtitle from the screen.
** ** ** ** ** 4. Basic Operation ** 4.6 Programme Information (I- plate) Programme information is displayed for a specific period of time whenever you switch channels. You can view the programme information by pressing the i button while watching a programme. button to hide the I-plate. Press the EXIT 1. General Information General Information is displayed as follows on the screen. ** ** ** 1. Channel number and channel name 2. Programme name 3. Icons Displayed only if this programme is recording.
** ** ** ** ** ** ** 4. Current time 5. Detail programme information: displayed if detailed programme information is provided. 6. Channel looping mode and Channel List Name : if you select Within the current channel list by selecting MENU - Edit Channels - Channel Change Mode, the Icon of Channel looping mode is displayed. And channel list, which you selected, is displayed. 7. Programme broadcasting time and progress bar: displays programme playing time and progress bar. 8.
** ** ** ** ** 4. Basic Operation ** 4.7 Option List You can view and confirm detailed information about the current channel and change the information. button when the channel list is displayed to view Option List. Then the Note: Press the OPT+ following functions in the option list are performed to the current channel where cursor is located. 1. Add a channel to favourite group You can add current channels to the favourite group immediately. Also, you can add a channel to multiple Favourite groups.
** ** ** ** ** ** ** 2. Lock/Unlock a Channel You can lock or unlock the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Lock using the button. OK button, and press the or button, and press the 3. Select Lock option using the button. OK 4. Select Unlock option using the button. the OK button, and press 5. You will be prompted to enter your Password. Enter your password to unlock the channel. 6. Move to the parent menu using the changes automatically.
** ** ** ** ** 5. Time Shifted Recording ** This unit automatically saves the programme on air so that users can watch programmes as they watch a video tape using functions such as rewind, fast forward, replay and pause. 5.1 Time Bar If you press playback control buttons while watching TV, the Time bar appears on the bottom of the screen.
** ** ** ** ** ** ** 5.3 Rewind to Previous Scene Press the REWIND button on the remote controller to watch the scene passed by. Whenever you press the REWIND button, the rewind speed increases by 3 steps. If you press the PLAY button, the rewinding operation stops, and the programme is played at normal speed. Note: You can rewind to the point when you have changed to the current channel.
** ** ** ** ** 5. Time Shifted Recording ** 5.6 Additional Time Shift Operations Using Time Bar You can perform additional time shift operations using the 5 operation buttons on the right side of the time bar. 1. Slow Motion Select SLOW MOTION and then press the OK button to play the current programme in once again to play the programme at normal speed. slow motion. Press SLOW MOTION ** 2. Direct Jump Select DIRECT JUMP and then press the OK bar.
** ** ** ** ** 6. Recording and Playback ** You can record a programme without an external media device such as a VCR. 6.1 Instant Recording Press the REC Press the STOP button on the remote controller to record the current programme instantly. button to stop recording. Note: • You cannot change channels during the recording operation. • Ensure that there is enough free space before recording, because if the free space on the hard disk drive is insufficient, recording will stop.
** ** ** ** ** 6. Recording and Playback ** 5. Select Programme Lock mode using the button. 6. When you have finished, select Save, and then press the OK button. button to cancel the reservation. 7. Select Cancel, and then press the OK Note: • You can reserve 20 programmes for recording. • If the programme to reserve overlaps with the existing one, adjust the reservation so as not to overlap.
** ** ** ** ** ** ** 6.3 Programme Playback Select your desired programme from the recorded programme list, and then press the PLAY button to playback the recorded programme. You can view the programme list recorded by instant recording or recording reservation by selecting Menu - Record - Recorded Programme. Otherwise, you can easily view the recorded programme list using PLAYLIST on the right side of the Time bar while you are watching a programme. 1. Press the MENU button. 2.
** ** ** ** ** 6. Recording and Playback ** 1. Deleting a Recorded Programme Select Delete in the edit screen, and then press the OK button. 2. Changing The Name of a Recorded Programme 1. Select Programme in the edit screen, and then press the OK button to display a keyboard on the screen. 2. Enter the desired programme name on the screen , and OK button. keyboard using the 3. Select OK, and then press the OK complete. button to 3. Protecting Recorded Programmes from Deletion 1.
** ** ** ** ** ** ** 6.5 Checking Hard Disk Drive You can check the free space of the hard disk drive, and can format the disk drive if necessary. 1. Press the MENU button. 2. Select Record using the or button. 3. Select HDD Control using the or button. OK button, and press the OK button, and press the 4. You can check the used and free space of the HDD. button to remove all 5. Select Format and press the OK the recorded programmes saved on the HDD, and initialise the HDD. ** 6.
** ** ** ** ** 7. Channel List ** Three types of channel lists are provided for easy and quick channel searching. TV The list of all TV channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. Radio The list of all Radio channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. Favourite The list of the favourite channels with 5 sub-groups that you can organise channels by your private taste. ** 7.
** ** ** ** ** ** ** 7.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. 2. Select your desired channel group using the to display its sub-groups. or 3. Press the OK sub-group using the button. button button, select your desired button, and then press the OK 4. The channel list for the selected sub-group is displayed.
** ** ** ** ** 7. Channel List ** 7.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the or button. the OK 3. Select Edit Channel Lists using the or button. press the OK button, and press button, and 4. You will be prompted to enter your password. Enter your password using NUMERICAL (0~9) button. Note: • Press the BACK or or EXIT the MENU • ** button to save the changes and return to the previous menu.
** ** ** ** ** ** ** 2. Delete Channels You can delete one or more channels. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button to delete the channel(s). You can select multiple channels. 3. Select Delete on the right using the button. the OK button, and press 3. Lock/Unlock Channels You can lock or unlock one or more channels. 1. Move the cursor to the channel list using the button. 2.
** ** ** ** ** 7. Channel List ** 7.4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the button. the OK button, and press 3. Select Edit Favourite Channels using the or button. and press the OK Note: • Press the BACK or or EXIT the MENU • button, button to save the changes and return to the previous menu. Press button to exit the Menu screen.
** ** ** ** ** ** ** 1. Add/Remove favourite channels You can add favourite channel(s) to a specific Favourite channel list or remove the added favourite channel(s) from the list. 1. Select Favourite Group using . 2. Select your desired channel(s) in all TV/Radio channel list, to add Favourite channel(s). and press 3. Select your desired channel(s) in Favourite channel list, to remove Favourite channel(s). and press Note: You can switch between TV and Radio channel list using TV/RADIO button or .
** ** ** ** ** 7. Channel List ** 3. Rename a favourite channel list You can rename Favourite channel list. 1. Select Favourite group to rename using 2. Select , and press the OK . button. 3. Enter the Favourite channel list name using the keyboard displayed on the screen. 4. When finishing entering the Favourite channel list name, button. select OK, and press the OK ** ** 4. Additional Features Additional Features provides many useful functions which are necessary to add Favourite Channel.
** ** ** ** ** ** ** Sort a channel list You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel searching. If channel lists are sorted by channel number, is displayed. When you press this button, all the channel lists are sorted by name. Or, if channel lists are sorted by channel name, is switched into . Press this button to order channels by number. ** Unselect all the selected channels Press button to unselect all the selected channel. ** 7.
** ** ** ** ** 8. Programme Guide ** The Programme Guide displays programme information about each channel, based on the date and time.You can also schedule your watching using the information given. 8.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move to previous or next programme within the same button. channel using the button. If 3.
** ** ** ** ** ** ** 2. Viewing Programme Information Using Time Bar You can quickly search for your desired time zone using the Time bar. 1. Press the GUIDE button. 2. Press the Green button to display Time Bar. button, and 3. Select the Time Bar button using the button to move as your desired amount press the OK of time. If you press the button repeatedly, the same operation is repeated. 4. Each button functions as follows. Now Moves to the current programme where the cursor is located.
** ** ** ** ** 8. Programme Guide ** 8.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. Note: If you press Previous or Next button on the Keyboard displayed on the screen, the keyboard layout is switched. 4. When completing entering programme name, select the Find button, and press the OK button. 5.
** ** ** ** ** ** ** 8.3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list. 1. Press the GUIDE button. 2. Press the Yellow button to display the Schedule screen. 3. Select the scheduled programme and press the OK button to edit the reservation information. 4. Select blank list and press the OK new reservation schedule. button to add a ** ** 1. Editing a Reserved Programme 1. Change reserved Start Time using the the NUMERICAL (0~9) buttons.
** ** ** ** ** 8. Programme Guide ** 2. Adding a Reservation 1. Enter your desired Channel Number using the NUMERICAL (0~9) button. The channel name is automatically displayed by channel number. 2. Enter your desired Start Time using the the NUMERICAL (0~9) button. button and button and 3. Enter your desired End Time using the the NUMERICAL (0~9) button. 4. Select one of repeat mode options among Once, Daily, button. and Weekly using the 5. Select Programme Lock mode using the 6.
** ** ** ** ** 9. Setting Preferences ** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or or EXIT the MENU • button to save the changes and return to the previous menu. Press button to exit the Menu screen. You can easily select any item from the menu using the NUMERICAL (0-9) buttons. ** 9.1 Parental Control You can set parental control for each programme and watching time. You can also change your Password. 1.
** ** ** ** ** 9. Setting Preferences ** View All All programmes can be watched because there is no age limitation. 7 Programmes are blocked for children under the age of 7. 12 Programmes are blocked for children under the age of 12. 15 Programmes are blocked for children under the age of 15. 18 Programmes are blocked for children under the age of 18. Lock All Programmes are blocked without considering the age level.
** ** ** ** ** ** ** 3. Change Password You can change the existing password into new one. button, and 1. Select Change Password using the button. press the or OK 2. Enter New Password using the NUMERICAL (0-9) button. button, and select OK and press the OK 3. Enter New Password again to confirm Verify Password, button. and press the OK Note: The Default Password is "0000". If you have forgotten your Password, please contact your local product distributor. 9.
** ** ** ** ** 9. Setting Preferences ** 2. Audio Priority You can select the priority of audio. 1. Select Audio Priority using the button. 2. Select one option from Dolby Digital or PCM using the or OK button. ** Dolby Digital This is used when the audio output is connected to 5.1-channel digital audio system. PCM This is used when the audio output is connected to general audio system including TV. ** 3.
** ** ** ** ** ** ** 9.3 Time Setting You can specify the current time and Power On/Off time. 1. Press the MENU button. 2. Select Preferences using the or button. OK button, and press the 3. Select Time Setting using the or button. OK button, and press the 1. Set Current Time You can set the GMT Offset for current time. 1. Select GMT Offset using the button. button to display GMT list. GMT is 2. Press the or OK changed by from 30 minutes to 1 hour. ** 3. Select your GMT offset using the button.
** ** ** ** ** 9. Setting Preferences ** 2. Power On You can set the time when the product is automatically powered on. 1. Select Power On using the button. 2. Select either Enable or Disable the Power On using button. the or OK ** Enable Uses the Power On and sets the Power On time. Disable Does not use the Power On. 3. When you have selected Enable, enter Channel No and Time using the NUMERICAL (0~9) buttons, and press the OK button. ** ** 3.
** ** ** ** ** ** ** 9.4 A/V Control You can set Audio or Video Output Control. 1. Press the MENU button. 2. Select Preferences using the or button. OK button, and press the 3. Select A/V Control using the or button. OK button, and press the 1. TV-SCART You can set TV SCART Output. 1. Select TV-SCART using the button. or 2. Select one option among CVBS/RGB/S-Video using the OK button. 2. VCR SCART ** You can set VCR-SCART Output. 1. Select VCR-SCART using the ** button, and press the OK 2.
** ** ** ** ** 9. Setting Preferences ** 4. Screen Ratio You can set the aspect ratio of your TV. 1. Select Screen Ratio using the button. 2. Select one option from 4:3 or 16:9 using the or OK button. 5. Display Format You can select the Display Format according to TV Screen Ratio. 1. Select Display Format using the button, and press the OK or button. 2. If the Screen Ratio is set to '4:3', you can select one among Auto/Letter box/Center Mode button, and press the OK button. using the 3.
** ** ** ** ** ** ** 9.5 UHF Tuning You can set the UHF channel. 1. Press the MENU button. 2. Select Preferences using the or button. OK button, and press the 3. Select UHF Tuning using the or button. OK button, and press the 1. UHF Channel You can select UHF Channels for the TV. The Channel range and Frequency change according to PAL Standard. 1. Select UHF Channel using the button, and press the OK or button. ** button, and 2.
** ** ** ** ** 9. Setting Preferences ** 9.6 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the or button. OK button, and press the button, 3. Select Miscellaneous Settings using the or button. and press the OK 1. i-Plate Display Time You can set the duration during which the Information box is to be displayed when you switch the channel. 1. Select i-Plate Display Time using the button, and press the OK or button. 2.
** ** ** ** ** 10. Installation ** This chapter describes how to search for channels and a series of procedures. 10.1. Channel Search If your product is connected to the cable and television, you can search channels manually by searching parameters, if you know the MUX information. 1. Press the MENU button. button, and press the 2. Select Installation using the button. You will be prompted to enter your OK password. 3. Select Channel Search using the or button. the OK button, and press 1.
** ** ** ** ** 10. Installation ** 3. Network Search 1. Select Network Search using the or button. the OK button, and press or 2. Select Disable or Enable using the OK button. Note: Enable allows you to use Network ID. 4. Network ID 1. Select Network ID using the or button. OK button, and press the 2. Select desired Network ID using the or button. press the OK ** ** ** ** button, and 3.
** ** ** ** ** ** ** 5. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Channel Search. 2. Wait while the recorder searches for the channels, this may take a few minutes. 3. During operating search, the cursor is located at Stop. button during Therefore, if you press the OK searching, the operation is stopped and only the channels found so far will be displayed. 4.
** ** ** ** ** 10. Installation ** 10.2 Linear Search You can search channels by setting the range of frequencies and other parameters. 1. Start Frequency and End Frequency 1. Select Start / End Frequency using the or button. press the OK button, and 2. Set the Start/End Frequency which the Linear Search start from/to in order to set the frequency range to seek. 2. Step ** ** ** ** 1. Select Step using the or button. button, and press the OK 2.
** ** ** ** ** ** ** 3. Append Symbol Rate 1. Select Append Symbol Rate using the or button. press the OK 2. Select the symbol rate using the button. the OK button, and button, and press 3. It will be displayed symbol rates that you selected. Product will search channels by all of symbol rates that you selected. 4. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Linear Search. 2. The next procedures are the same as those for Channel Search.
** ** ** ** ** 10. Installation ** 10.3 Default Setting Default Setting restores the product to the default settings Warning: Please note that once you perform Default Setting, all data such as Channel List and User Configured data are deleted. To perform Factory Default: 1. Press the MENU button. 2. Select Installation using the or button. OK button, and press the 3. Enter Password using the NUMERICAL (0~9) button. 4. Select Default Setting using the or button.
** ** ** ** ** 11. Software Update ** In order to maintain proper performance of this product, it is essential to have the most up-to-date software. Whenever new software is released, com hem will upgrade your product via OTA. 11.1 OTA (Over the Air) OTA, an abbreviation of "over-the-air" , means that the software can be downloaded where the manufacturer reserves the right to decide when and where to release through cable.
** ** ** ** ** 11. Software Update ** 1. If new software is found when powering on 1. A message will be displayed to notify that new software is found. 2. Select Yes and press the OK button to update the software. 3. Starts downloading new software. Please wait until the update is completed. 4. When completing the software update, the equipment is automatically powered off and on again. 2. If a new version of software is detected during watching a programme 1.
** ** ** ** ** ** ** 3. If using Software Update You can perform Software Update only if you know MUX information of software update correctly. 1. Press the MENU button. button, and press the 2. Select Installation using the or button. OK 3. Enter Password using the NUMERICAL (0~9) buttons. 4. Select Software Update using the or button. press the OK button, and 5. Set the Frequency which provides update software. 6. Select the Symbol Rate.
** ** ** ** ** 12. System Information ** You can view all system information, signal strength, and smart card information. 1. Press the MENU button. 2. Select System using the or button. button, and press the OK 12.1 Status You can view System information 1. Select Status using the or button. button, and press the OK 2. Confirm the information about Hardware version, Software version, Loader version, System ID, Update Date. ** ** 12.
** ** ** ** ** ** ** 12.3 Conditional Access (for Conax embedded) 1. Product Ordering This item is for IPPV and it will be reserved until software is updated. When the cursor is located in this menu, there will be no action even after selecting. ** 2. Subscription Status This shows the authorised list of Conax channels in the smart card. ** 3. Event Status ** This menu shows the channel ordered using PPV. 4. Change CA PIN This lets you change the Smart Card PIN code. 5.
** ** ** ** ** 13. Games ** This product provides various games for user's entertainment. ** 1. Press the GAME button. 2. According to the instruction displayed on screen, you can enjoy the game using using the button, and OK button. ** Note: Press the EXIT or BACK button to exit the game.
** ** ** ** ** 14. Menu Map ** ** ** ** This recorder doesn't support a gray item.
** ** ** ** ** 15. Troubleshooting ** 15.1 Troubleshooting Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service centre. ** 1. The LED on the front panel does not light. ** - Check the main power cable and check that it is plugged into a suitable power outlet. 2. No picture ** - Make sure that the product is in Operation Mode.
** ** ** ** ** ** ** 15.2 Error Message Error message Possible causes What to do No or bad signal The cable is not connected. Make sure the cable is connected properly. The cable may be damaged or defective. Exchange the cable. The channel is not broadcasting. The channel is scrambled or not available. The channel has signal, but no video. Confirm if the channel is currently on air. The channel is deleted by broadcasting company. The channel is for data broadcasting.
** ** ** ** ** 16. Specification ** Tuner and Channel Input Connector IEC-type, IEC-169-2, Female Frequency Range 47MHz to 862MHz Input Impedance 75 Signal Level -13 to +15 dBm Demodulation QAM Input Symbol Rate 1.
** ** ** ** ** ** ** A/V and Data In/Out Video RCA/SCART Video Output (CVBS, S-Video, RGB) Audio R/L RCA/SCART Volume and Mute Control (Resolution: 20 bits DAC, MAX, 2Vrms) S/PDIF Digital Audio Output, Fiber-Optic (Resolution: 20 bits) RS-232C Transfer Rate : 115,200bps, 9 pin Socket type Power Supply Input Voltage 90~250V AC, 50/60Hz Type SMPS Power Consumption Max. 20 W Standby Power Max. 10W Protection Separate Internal Fuse.
** ** ** ** ** 17. Glossary ** Frequency The number of cycles or events per one second, which is expressed in the unit of hertz ** FTA (Free-To-Air) An unscrambled broadcast, which you can view without additional payments to a service provider. ** Hi-Fi (High Fidelity) The characteristics of audio devices that can play back all the audio frequencies of the human, which is the range of 16Hz~20KHz, uniformly from the low frequency to high frequency.
** ** ** ** ** 18. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http://www.humaxdigital.com English http://www.humaxdigital.com/Deutsch/ Deutsch http://www.humaxarabia.
** ** ** ** ** 18. Service and Support ** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: callcenterME@humaxdigital.
HNCXC2000PVRCH.