Digital Terrestrial MHP Receiver The default PIN Code is set to 0000.
Notice Negation of responsibility The information contained in this user’s manual is based on the characteristics of the product at the time the initial draft was made. Despite effort to provide information on the specific features and functions of the product, details of the hardware and software are not provided. The features relevant to installation and maintenance are not described. Functions that are not seen in the hardware and software may appear in the manual.
Notice Meaning of Symbols To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Customer information According to art. 13 of the Legislative Decree 25th July 2005, no.
Safety Warning Security notice This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 100-240V a.c., 50/60Hz • Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company.
Safety Warning • If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting. • Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. • A falling product can cause serious injury to a child or adult, and serious damage to the appliance. 10.
Contents 1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.2 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Before Using the Product 1.1 Package Contents When you unpack your package contents, make sure you have all the necessary items shown in figure below. If any of items is missing or damaged, please contact your product dealer for replacement. Quick Guide Remote Control Adapter Quick Guide Batteries External IR Module Scart Cable Note: • Faults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control.
1. Before Using the Product 1.2 Setup 2 1 3 8 ANTENNA IN 4 5 6 7 1. RS-232C Connects to the PC to update software. 2. IR Connects to the external IR module. 3. ANTENNA IN Connects the aerial cable. 4. TV SCART Connects to the TV using a TV SCART cable. 5. S/PDIF Connects to the audio system using an S/PDIF cable. (digital audio) 6. Power Adapter Connects to the power adapter. 7. TV/VCR Connects to the RF IN of the TV or VCR using an RF cable. 8. POWER SWITCH Power on/off.
1. Before Using the Product 1.3 Remote Control 1 1. TV/RADIO Switches between TV and radio modes. 2 2. MUTE 12 Mutes or unmutes the audio temporarily. 3 4 5 6 7 3. NUMERIC(0-9) BUTTONS Enters a TV/radio channel number. 4. LIST Displays the channel list. 5. BACK Closes and returns to the previous menu and 13 screen. 6. ARROW BUTTONS 14 Changes the channel or moves the cursor up, down, left or right. 7. COLOUR BUTTONS(R/G/Y/B) Select the colour keys for interactive applications. 8.
1. Before Using the Product 12. STANDBY Switches between operation and standby modes. 12 13. GUIDE Displays the programme guide. 14. EXIT Exits all On-Screen Display (OSD) screens. 15. OK Selects a menu or confirms the selected operation. 13 14 16. V-/V+ Adjusts the audio volume. 17. TEXT Switches between the teletext and TV modes. 18. SOUNDTRACK Displays the soundtrack list. 15 16 17 18 19 GB10 User’s Manual 19. SUBTITLE Displays the subtitle language list.
2. Basic Operation 2.1 Installation Wizard When powering on your product for the first time after purchasing, the Installation Wizard is automatically started. You can easily set-up using simple organization and options, and watch the broadcasting after completing the set-up procedure. Note: The default PIN Code is set to 0000. 1. Language You can select menu, audio, and the subtitle language.
2. Basic Operation Select the channel you want to apply to the LCN using the RED button. Press the OK button to move to the next. Press the RED button to add a channel. Press the GREEN button to add all channels. Press the OK button to save. 2.2 Basic Function 1. Program Banner General Information Program Banner is always displayed for a specific period of time whenever you switch channels. You can view the program banner by pressing the i button while watching a program.
2. Basic Operation 5. 6. 7. 8. 9. Program broadcasting time and progress bar: displays program playing time and progress bar. Current time and date Subtitle Language Next program Information: displayed if next program information is provided. Press the button to display the next program information. Icons Represents parental level. Displayed only when there is any MHP application. Displayed only when there is any teletext information. Displayed only when subtitle information is available. 10.
2. Basic Operation 3. Channel Change You can switch the current channel using one of the following methods. 1. 2. 3. Press the CH-/CH+ button. Enter your desired channel numeric using the NUMERIC(0-9) button to move to the channel directly. Press the TV/RADIO button to switch between TV channel and Radio channel. Note: You can switch channel using the channel list or program guide. Please refer to 2.2.6 TV Guide and 2.2.7 Channel List for more information. 4.
2. Basic Operation 6. TV Guide The Program Guide displays program information about each channel, based on the date and time. Press the GUIDE button. 7. Channel List Three types of channel lists are provided for easy and quick channel searching. (All TV, All Radio, Favorite Channels) 1. 2. 3. Press the LIST button while watching a program to display the selected channel list. Select your desired channel and press the OK button to change the channel.
3. Menu You can easily navigate the menu using the following instructions: 1. 2. 3. 4. 5. 6. 7. Press the MENU button to display the main menu screen. Select a item using the p/q button. Press the OK button to move from the menu to the sub-menu. Press the t/u button to select option values. Press the OK button to save your selection. Press the BACK button to return to the previous-menu. Press the EXIT button to close the MENU. Note: • Some menu items are access controlled.
3. Menu 2. Block Channel You can lock or unlock channels. 1. 2. Press the RED button to lock or unlock. Press the GREEN button to switch from TV to Radio channel list. When switching to the locked channel, you must enter the PIN Code to watch a program. The Default PIN Code is 0000. If you have forgotten your PIN Code, please contact your local product distributor. 3. Change Channel No You can change the channel number. Select a channel you want and press the RED button.
3. Menu 3.2 Preference 1. Parental Rating You can block programs according to the age level you have set. Select the age level. (No Control, 7 years, 12 years, 14 years, 18 years, Lock All) Note: • You have to enter PIN Code to watch the program which is blocked by the age level. • The default PIN Code is 0000. 2. Banner Duration You can set the duration of the mini EPG to be automatically displayed when you switch the channel.
3. Menu 3. Change PIN Code You can change the existing PIN Code into a new one. Input your PIN Code. Input the New PIN Code and re-input to confirm. Note: • The default PIN Code is 0000. • If you have forgotten your PIN Code, please contact your local product distributor. 4. Application Auto-start You can select Yes or No to set the MHP application starting attributes. If it is selected, all interactive application in auto-start mode will be started automatically at every modification of program. 5.
3. Menu 6. Subtitle You can select the subtitle On or Off. 7. Use LCN You can select the LCN Yes or No.
3. Menu 3.3 System 1. A/V Setting You can set the audio or video output control. 2. Language Options You can set the language for the menu, primary audio and subtitle. 3. Upgrade Software You can set the software upgrade attributes. Please refer to 4.1 OTA for more information.
3. Menu 4. Search Channel You can search channels by selecting the channel, frequency and bandwidth. Enter your desired channel, frequency and bandwidth to search directly. Then press the OK button. If you press the RED button, you can automatically search channels without entering any other information. 1. 2. 3. Press the RED button to add a channel. Press the GREEN button to add all channels. Press the OK button to save. 5. System Status You can view System information.
3. Menu 6. Signal Detection You can view the strength and quality of the signal of the channel that is currently on AV. 7. Timezone You can set the GMT Offset for current time and select the Summer Time On or Off. 8. Factory Reset You can reset factory information. Input your PIN Code. All the stored data can be initialized. Note: The default PIN Code is 0000. Warning: Please note that once you perform Factory Reset, all the stored data will be deleted.
3. Menu 3.4 Pay Per View Services 1. 2. 3. 4.
4. Software Update In order to maintain proper performance of this product, it is essential to have the most up-to-date software. Please refer to http://www.humaxdigital.com for software update. It is recommended that you upgrade your software at regular intervals. 4.1 OTA (Over the Air) OTA, an abbreviation of “over the air”, means downloading the software where the manufacturer reserves the right to decide when and where to release through aerial.
5. Trouble Shooting 5.1 Trouble Shooting Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local product distributor or service center. 1. No message is displayed on the front panel or product has no power • Check the main power cable and check if it is plugged into a suitable power outlet. • Check if Power Switch is On. 2.
5. Trouble Shooting 5.2 Error Message 1. OSD Messages Error message in full AV mode Signal is weak • Please check antenna Error Message in scaled AV mode Signal is weak • Please select other channels Possible causes What to do Antenna cable is unplugged. Check if the antenna cable is plugged in. Service not available Failed channel tuning. Reactivate Channel Search. No Channels No search results(channels). Reactivate Channel Search.
5. Trouble Shooting 3. Irdeto MMI Message Error message in full AV mode Error Message in scaled AV mode Possible causes E04 - Smart Card not inserted Smartcard has not been inserted. E05 - Invalid Smart Card Invalid Smartcard has been inserted. E07 - Verifying Smart Card Displays while verifying Smartcard. E16 - No rights on Smart Card No authority given to access programme. GB28 User’s Manual What to do Consult distributor.
6.
6. Specification Power Supply Input Voltage DC 12V 1.0A Power consumption Operation: Max. 7W Standby: Max. 6W AC Power Adaptor AC 100~240V 50/60Hz Max 1.0A Physical Specification Size (W×H×D) 64x146.
7. Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following website. Should your product require warranty service, please contact the customer service center of which telephone number is on the website. HUMAX Italia Website: E-mail: www.humaxdigital.com/italy servizioclienti@humaxdigital.com Note: For hardware repair, please visit our website. Humax Srl Via Brescia 28 20063 Cernusco S/N (MI) Fax.
www.humaxdigital.
