Contents Safety ................................................................. GB2 Copyright & Glossary ......................................... GB3 Reference ........................................................... GB4 STB Connections ................................................ GB5 ~ GB8 Remote Control Unit ........................................... GB9 ~ GB10 Guide of Functions ............................................. GB11 ~ GB13 Guide of Main Menu ......................................
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 90 - 250V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus.
Copyright & Glossary CAUTION To watch Pay Per View programmes, be sure to inform your STB dealer of the STB’s and Smart card’s serial numbers. So that they can pair your STB with your Smart card. Otherwise, you cannot watch the programmes because they are scrambled. NOTE When the changed Network Information is sent, Nagravision realizes that the appropriate satellite/cable service information has been changed. And it will re-organize the service information based on the sent Network Information.
Reference 1. Loop Through If you have another analogue or digital STB and you wish to use the same RF Signal then you can connect it via the loop through. Connect one end of a RF cable to the TV/VCR on the STB and connect the other end to the RF(ANT) on your second STB. 2. Software Upgrade HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications.
STB Connections Front Panel F1-4000T NA-4710T Free-To-Air 1 Smart card 1 STANDBY Press to switch between Operation and Standby modes. 2 TV/RADIO Press to switch between TV and Radio modes. 3 -p+ Use to change services down/up. 3 -v+ Use to change volume down/up. 5 STANDBY LED(RED) Indicates that the STB is under standby. 6 TV LED(AMBER) The LED lights on in TV mode. 7 RADIO LED(GREEN) The LED lights on in RADIO mode.
Rear Panel 1 TV SCART For the audio/video input of the TV. 2 VCR SCART For the VCR. 3 AUDIO/VIDEO OUTPUT Audio/video signal from your STB to VCR or TV. 4 ANTENNA Use to connect a general Aerial Antenna and CABLE jacks to a ANTENNA input jack on the STB. 4 TV/VCR Use to connect a RF signal from your STB to RF(ANT) input jack on your TV or VCR . 4 RS-232C Use it when connecting to your PC.
STB Connections Example 1 In this example a TV set is connected to the digital receiver. If possible the TV should be connected with the digital receiver through a Scart cable. If the TV doesn’t have a Scart connection or if you want to connect a second TV to the digital receiver, the UHF output of the modulator may be used. Example 2 In example 2 a VCR and a hifi stereo components system are connected to the digital receiver in addition to the TV. The VCR should be connected through a Scart cable.
Remote Control Unit GB9
1 NUMERIC BUTTONS Press to select a service, enter your PIN Code or numeric on the menu. 2 INFORMATION (RED) Press to display the programme information box on the screen. And this button functions same as the RED button on the menus. 10 TV/DTV Press to select the TV/DTV mode. 11 TV/RADIO Press to select the TV/RADIO mode. 12 MUTE Press to temporarily cut off the sound. 3 SOUNDTRACK (GREEN) Press to display the soundtrack list for the current service.
Guide of Functions Information Box (I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part.
Changing Services To change services, do in the following sequence; 1. Press the NUMERIC buttons(0~9) on the remote control unit. 2. Press the buttons or buttons. Or press the RECALL( ), Service-list( ), EPG( )mode button. To switch between TV and Radio services, press the TV/Radio ( ) button. To select the previous viewed Service, press the RECALL( ) button. Volume Control To adjust the volume level, use the buttons or buttons. To temporarily stop the volume, press the MUTE( )button.
Guide of Functions Subtitle When the current broadcasting programme provides subtitle, press the SUBTITLE( )button to see the current subtitle language list. To change the subtitle language: 1. Use the buttons to select a Subtitle language you want. 2. Press the button and the selected language is highlighted and then the Subtitle Language you want is displayed on the screen. Press the button to cancel the Subtitle mode. Teletext Use your TV Remote Control Unit to control the Teletext service.
Guide of Main Menu 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. 2. TV Guide Your STB has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services.
Guide of Main Menu 1. Select Service To select the desired in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: Simple Service List 1. Use the buttons to select “Select Service” from the Main Menu and press the button. 2. Use the buttons to select “Simple” from the Main Menu and press the button. 3.
ServiceFavourite Favourite Service 1. Press the GREEN( )button on the remote control unit to select the Favourite service list. Note : The groups are labeled in four different alphabet characters (A,B,C,D). 2. Use the buttons to select a favourite group that you want. 3. Press the GREEN( )button to toggle group and service list. Service Network 1. Press the YELLOW( )button on the remote control unit to select the Network service list. 2. Use the buttons to select a service 3.
Guide of Main Menu 2. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes.
Weekly mode Shows the information of programmes that will be played for a week. Select a day you want using the buttons. To watch and reserve a programme you want, do the same steps with the Now/Next mode. Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name.
Guide of Main Menu 3. Parental Control You can set a parental guidance rating to each programme in this mode. 1. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is 0 0 0 0 . 2. Enter the PIN code on the display window. (If any problem occurs when entering a PIN code, you cannot switch to the next mode.) 3.
4. Installation This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, A/V Output Setting, UHF Tuning and Other Settings. Language Setting Select the language for menu, audio or subtitle. 1.
Guide of Main Menu Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup mode and Sleep Time (standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting. Current Time To set the Current Time, enter the Offset value using the standardised information of current service area. The time setting will be used as the standardised time for the I-Plate, TV Guide, Wakeup and Sleep Timer.
A/V Output Setting Video Output (CVBS/S-Video/RGB) Set the video mode for the TV SCART output. Audio Output Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) Screen Mode Select the aspect ratio of TV which is connected to STB (4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Centre mode as selected.
Guide of Main Menu UHF Tuning You select the STB output by using the UHF channel. Channel Select an UHF channel. The range of channels and frequency value are different for each PAL Standard: PAL I/G for Europe : CH21 ~ CH69 PAL B for Europe/Australia : CH28 ~ CH69 PAL D for China : CH13 ~ CH62 PAL K for Russia : CH21 ~ CH69 PAL Standard Select a PAL Standard according to the above range of channels. Offset Adjust the fine tuning value. The Offset ranges from -4 to +4 and each Offset represents 1MHz.
Other Setting Select the OSD Transparency, Information Box Display Time and so on. OSD Transparency Select the OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque, 20%, 40%, 60% and 80%. Info. Box Display Time Set the display duration of Information box displayed on the screen after changing services. The time ranges from 0 to 20 seconds.
Guide of Main Menu 4-2. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks. ** The default PIN code is 0 0 0 0 . Organise TV Services Organise All Services This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. • Delete 1. Press the RED( )button to delete unwanted services. 2. Highlight the services that you want to delete in grey. 3. Press the button to confirm. 4. Press the button to cancel the deletion.
• Rename 1. Press the WHITE( )button to change the service name. Then, the keyboard image will be displayed on the screen. 2. Key in the new service name. You can use the four direction keys to move or select the services. : to move the previous service : to move the next service : to move back by 10 services : to move forwards by 10 services Note : The box between service list and the description of the colour buttons offers the brief information of a service where the cursor is located.
Guide of Main Menu Organise Service Genre The Organise Service Genre feature allows the user to Delete/ Lock/Skip/Rename a service in the selected Genre. Available genre : Movie, News, Show, Sports, Children, Music, Art, Education, etc. The colour buttons function same as ones for Organise All services except the following differences: • When you delete a service in the selected genre, it will be available again on the All TV services list at the right side.
Organise Radio Services The Organise Radio Services functions same as TV Services except that it uses Radio Services. You can delete or move Radio Services and change the attributes of them. Organise All Services The Organise All Services lets the user Delete, Move, Lock, Skip or Rename Radio services on the All Radio services list.
Guide of Main Menu 4-3. Service Searching A service is transmitted in a transport stream. To watch the service, all services in the transport stream should be searched and stored in this menu. The proper information to search the stream is provided by the network operator. Please contact your installer or the network operator. ** The default PIN code is 0 0 0 0 . Easy Search The services can be searched with minimal information in this menu, “Easy Search”.
Custom Search The menu, “Custom Search” operates similar as the menu “Easy Search”, however more parameters are required to search the services. Select proper items as follows. To get proper information, please contact your installer or the network operator. Frequency Enter the exact frequency (kHz) of the channel, in which a transport stream is transmitted. Mode Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using the buttons. If the information is not known, then “Auto” can be selected.
Guide of Main Menu Network Search Select the option “YES” to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other channels and stores the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all channels manually.
4-4. Status STB Status Displays the information of H/W Version, S/W Version and Loader Version of STB and so on. Signal Detection Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting. STB Upgrade You can download and upgrade the software of this STB via Transmiting station when the software of new version is released. Do not turn off the STB during downloading.
Guide of Main Menu 4-5. Conditional Access(For Nagravision Embedded) This menu allows the user to view the information on the Smart card and Nagravision Conditional Access system such as version and serial number of Smart card. • F1-4000T models are not applicable. PPV purchase list If you perchased events in advance, the entitlements of Pay Per View events will be displayed. (ID, event name, service name, start time, status and cost) Credit information Displays the Credit information.
Troubleshooting Guide GB34
Menu Map GB35
GB36
Specification Conditional Access Interface Nagravision Embedded 1 Slot Smart card • F1-4000T models are not applicable.
A/V & Data In/Out TV SCART VCR SCART VIDEO AUDIO R/L RS-232C Video Output(CVBS, S-Video, RGB) Audio Output (Resolution : 20 bits DAC, Max. 2 Vrms) Video Output(CVBS) Video Input(CVBS, S-Video, RGB) Audio Output(Resolution : 20 bits DAC, Max. 1 Vrms(fixed)) RCA/Cinch, Video Output(CVBS) RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max. 2 Vrms) Transfer rate Max.
