User's Manual

8. Installation

If you wish to search multiple transponder at the same time, you can run Multiple Manual

Search. This function is useful when repeating Manual S earch.

① Select

Multiple Manual Search from Other Search

Menu using the ▲ ▼ button, press the <OK> or

<Right> button to enable the Multiple Manual S earch.

② Select one option among Satellite, Edit TP List,

Scrambled Type, C hannel Type using the ▲ ▼ button,

and press the <OK> or <Right> button.

③ Set the selected item.

[ Note]

Settings for Satellite, S crambled Type, and Channel Type is the same as those of Manual S earch.

Refer to Manual Search.

Edit TP List

You can edit TP list to search at a time and change the setting for Transponder.

① Select

Edit TP List from Multiple Manual S earch, and

press the <OK> or <RIGHT>button.

② Select Add and press the <OK> button to add a new

Transponder data.

③ Select a specific transponder from the transponder

list, press the <OK> button, select Edit, and then

press the <OK> button to edit Transponder data.

④ Select a specific transponder from the transponder

list, press the <OK> button, select Delete, and then

press the <OK> button to delete Transponder data.

You can select multiple transponders to delete.

⑤ When completing configuring transponder list, select

Save and press the <OK> button to save the result and

exit.

[ Note]

When you select Default List and press <ok>, default

transponder list is displayed.

8.5 Motor Antenna

If you use Motor Antenna, which is operated by motor, you should set the antenna as

Motor before Channel Search.