User's Manual
8. Installation
61
① Select Motor Limit using the ▲ ▼ button.
② Set Motor Limit to
Disable by pressing the <OK> or
<RIGHT> button.
Enable Motor Limit is already set. Motor does not
move more than the amount of limit.
Disable Motor Limit is disabled. S etting is
released.
[ Note]
When newly setting Motor Limit, set the value to Disable.
③ Select
Limit Position using the ▲ ▼ button.
④ Select the Direction of Limit by pressing the <OK> or
<RIGHT> button.
East Motor sets East limit to move.
West Motor sets West limit to move.
⑤ Select Set Limit using the ▲ ▼ button.
⑥ Move antenna to the
limit position to set using
<RIGHT> or<LEFT> button.
⑦ Press the <OK> button to set limit.
⑧ If limit is set, Motor Limit option is automatically
changed into Enable.
Reset Position
You can restore the position saved at Motor Antenna to the default setting.
① Select Reset Positions using the ▲ ▼ button.
② Press the <OK> button.
③ Select Yes and press the <OK> button to restore all
saved value at Motor Antenna to the default setting.
④ Please wait during the Motor Antenna is restored.
[ Note]
Motor Antenna may not be reset depending on Antenna condition. In this case, please repeat the