User's Manual

8. Installation
62
above procedure again.
8.6 Default Setting
Default Setting restores the receiver to the default settings
[ Warning]
Please note that once you perform Default S etting, all data such as Antenna Setting information
Channel List, and User Configured data are deleted.
To perform Factory Default:
① Press the <menu> button.
② Select
Installation using the ▲ ▼ button, and press
the<OK> or <Right> button.
③ Enter password using the <Numerical> button.
④ Select Default Setting using the ▲ ▼ button, press the
<OK> or <Right> button.
⑤ Select Yes and press the <OK> button to restore all
setting to Factory Default.
Select No and press the <OK> or <Back> button to
return to the previous menu.
⑥ Confirm again to start loading default setting. Enter
password using the <Numerical> button to perform
restoring.
⑦ When completing the default setting, press the <OK>
button to automatically run the
Installation Wizard.
When default setting is completed, Installation Wizard
is automatically displayed, which helps Channel
Search. For detailed information about Installation
Wizard, refer to 3. Installation Wizard.