Operation Manual

GB22
User’s Manual
3. First Installation
When powering on your product for the  rst time after purchase, the First Time Installation will appear.
If nothing appears on your TV set please check the following:
• Your TV set is switched ON.
• Please check that the cables between the TV and product are connected correctly.
• Your TV set is switched to the correct channel/input for the connection method/cable you are using.
Tip:
• The default password is 0000.
• If you have forgotten your password, please contact Humax Customer Support.
3.1 User Settings
User Settings allows you to set the language, screen
ratio, display format and resolution.
Select the value for Preferred Language,
Screen Ratio, Display Format and Resolution.
Select Next and press the OK button.
Note: Not all resolutions may work (or be available)
with the type of connection (or TV Set) your
are using. If you experience problems please
select a di erent resolution.
3.2 freesat detection
1. Con rm the satellite cable(s) are connected and
press the OK button.
2. Please wait until the freesat detection is complete.
3. When the freesat signal is detected, press the OK
button to go to the next step.
Note:
• If the freesat detection fails please check that the
satellite cable(s) are connected correctly.
• For further help see the 14. Trouble Shooting
section of the manual.
Warning: To prevent electric shock, always POWER
OFF all devices during setting up the
connection.