Operation Manual

7. Settings
GB46
User’s Manual
3. Power Saving in Standby
You can select whether the product switches to power saving mode in standby.
1. Select Power Saving in Standby.
2. Select On or O using the OK or
/ button.
Note:
When set the following will be disabled:
• Front display panel will not show the time
• LNB loop-through
• SCART loop-through
When Power Saving in Standby is enabled any schedule recordings you have set will record as the
product will switch on to record the programme and go back to standby when completed.
4. Automatic Standby
When Automatic Standby is set to Enable the product automatically switches to standby mode after a
period of inactivity to help reduce the amount of electricity used.
1. Select Automatic Standby.
2. Select Enable or Disable using the OK or
/ button.
5. Guide Channel Genre
You can choose to display the Genre List when accessing the Guide.
1. Select Guide Channel Genre and press the OK button.
2. Select Enable or Disable using the OK or
/ button.
7.7 STB Mode
1. Press the MENU button.
2. Select Settings using the
/ button and press
the OK button.
3. Select STB Mode using the
/ button and press
the OK or
 button to select freesat or
Non-freesat.
Note: STB Mode will only appear when non-freesat
channels have been tuned and saved using the
Manual Tune option in the setup menu.