Operation Manual

9. Setup
GB52
User’s Manual
9.2 Manual Tune
1. Press the MENU button.
2. Select Setup using the
/ button and press the
OK button.
3. Select Manual Tune using the
/ button and
press the OK button.
4. Select Search and press the OK button. The
channel search will start.
5. To stop the search, press the OK button during
channel search.
6. The results will appear. Select Save and press the
OK button.
Transponder Select All to search for all transponders in the list.
Press OK to display the list of transponder, select the transponder you require
and press the OK button to search for it only.
If the transponder you require is not listed, select User De ned and enter the
transponder details you require.
Network Search Select Disable or Enable using the OK or
/ button.
Scrambled Type Select All or FTA and press the OK button.
Channel Type Select among All, TV and Radio and press the OK button.
Note: Searching for channels using Manual Tune will active the STB mode option in the Settings menu.
The channels detected and displayed in non-freesat mode will only display the Now and Next
programmes in the TV Guide. If there are no channels available, a message indicating the result
will pop up.