User's Manual

GB10
Remote Control
Remote control does not work.
• Check new batteries are properly inserted in the remote control.
• Remove and reinsert the batteries in the remote control.
HUMAX Cast does not work.
• Check your mobile phone and H3 are connected to the same network.
• Check your HUMAX Cast is paired with your H3.
• Check the Ethernet cable is connected to the wireless router.
• Avoid metal, brick wall or concrete obstructions between your H3 and the
wireless router.
Network
Wired network is not connected.
• Check the Ethernet cable is connected to your H3.
• Check the network settings are properly set up.
Wireless network is not connected.
• Check the correct wireless network is selected.
• To set up the wireless network, go to HOME > Settings > Network >
Wireless LAN.
Select the wireless network and enter the PIN code. If your wireless
network is not listed, select Add Network.