Quick Start Guide

English
47
Installation
Manual Update
1. SelectManual UpdateandpresstheOK
button.
2. Entertheoptionsmanually
 Channel:Selectthechannel.
 Frequency :Enterthefrequency.The
correspondingfrequencyvaluewillbe
automaticallydisplayed.
 Transmission:Select DVB-T orDVB-T2.
3. SelectSearchandpresstheOKbuttonto
searchfornewsoftware.
4. Whennewsoftwareisdetected,selectYes to
starttheupdateprocessnow.
 Pleasewaituntiltheupdateiscomplete.When
completingthesoftwareupdate,theproduct
isautomaticallypoweredoandonagain.
Note:
• Itmaytake5~10minutestoupdatesoftware.
• Otherfunctionssuchasschedulingprogrammeswillnotactivatewhilesoftwareupdatetakesplace.
• ThesoftwareupdateswillonlybedownloadedoverairifyouarereceivingtheHDchannelsavailable.
IfyoudonotreceivetheHDchannelsatthecurrenttimepleasevisithttp://www.humaxdigital.co.uk/
updatetoupgradeviaUSB.
• Besuretoupdatesoftwarewhenthesignalstrengthandqualityishigh.Iftheweatherisnotfavorable
andthesignalstrengthandqualityarenotrecommendable,performthesoftwareupdatelater.
• Theproductwillsearchnewsoftwareautomaticallyduringstandby.Ifnewsoftwareisdetected,you
canchooseeithertodownloadimmediatelyorlaterwhenyouswitchintooperationmode.Ifyou
selectLater,themessagewillbedisplayedagainwhenyoupoweron.
Caution:
• Pleasebecarefultokeepthepoweronandthepowercordpluggedinduringsoftwareupdate.Ifthe
powerisoduringsoftwareupdate,fataldamagemaybecausedtotheproduct.
• Pleasebecarefulnottopulloutthesignalline(RFcable)duringsoftwareupdate.Updatemaybe
interruptedandtheproductmaynotoperate.