Quick Start Guide

48
Installation
Antenna Power
MENU  Settings  Installation  Antenna Power
Activeantennaisaportableorindoorantennawhichneedspowersupplyfromtheproductbecauseit
doesnothavepowercordforitself.ConnectanactiveantennatotheANTENNA INontherearofthe
product.
1. Select5V Antenna Power.
2. Selectanoption.
 On: 5Vpowerissuppliedfromtheactiveantenna
 cable.
 O: Nopowersupplied
Note: Mostdomesticaerialinstallationwillnot
requiretheAntennaPoweroptiontobe
switchedon.Pleasecheckwithyouraerial
installerifthisisrequiredforyouraerial.
Factory Default
MENU  Settings  Installation  Factory Default
1. SelectFactory Default.
2. Apopupwillappear.SelectYe s.
3. Youwillbepromptedtoenterthepassword.
Enterthepassword.
Note:
• Thedefaultpasswordis0000.Ifyouhave
forgottenyourpassword,pleasecontact
HumaxCustomerSupport.
• ToformattheHDD,markFormat HDD.
Warning:
• PleasenotethatonceyouperformFactory
Default,alluserconguration/settingswillberesettotheFactorysettings.Aftercompletingthe
factorydefault,theinstallationwizardwillappearautomaticallyinafewseconds.