Quick Start Guide

50
Menu On/O Select Conrm Enter 0~9
System
Power Management
MENU  Settings  System  Power Management
Setting Power Saving in Standby
Youcanminimisethestandbypowerconsumption
tobelow0.5W.
1. SelectPower Saving in Standby.
2. SelectOntodeactivatethecertainfeatures
andminimisethepowerconsumption.
Setting Automatic Power Down
Thereceiverautomaticallyentersstandbymode
forpowersavingifnouserinteractionoccursfor
3hours.
1. SelectAutomatic Power Down.
2. Select Ontoenterstandbymodeautomaticallyifnouserinteractionoccursfor3hours.
Note: WhenPower Saving in StandbyisswitchedOntheTimeonthefrontdisplaywillnotappearwhen
instandby,norwilltheAntennaOutloop-throughthesignaltoaconnecteddevice.
YELLOW BLUE GREEN RED
YELLOW BLUE GREEN RED
YELLOW BLUE GREEN RED
YELLOW BLUE GREEN RED