User`s manual

English

Quick Start Guide

Connecting the Antenna

ݎConnecting to Two Satellites;

Connect the two RF cables from your satellite dish to the LNB 1 IN and LNB 2 IN connectors.

Note: This connection will allow you to view di erent channels while recording or record two channels

at the same time.

ݏConnecting to Single Satellite;

1. Connect an RF cable from your satellite dish to LNB 1 IN connector.

2. Connect the LNB 1 OUT and LNB 2 IN connectors using a loop through RF cable.

Note:

• When using this connection, the speci ed functions for 2 tuners will be not available.

• When using a Motorised System or SCD Antenna (also known as Unicable), connect the RF cable only

to LNB 1 IN connector.

Loop-through

Two satellites