User`s manual
62
Menu On/O Select Conrm Enter 0~9
Installation
Position Setting
1. Select Position Setting.
2. Select
Satellite and select the satellite.
3. Select
Transponder and select the
transponder.
4. Select
Motor Driving and select the motor
driving option.
Continuous, Step, Time
Select the Driving Size from 1~127 when
choosing Step or Time.
5. Select Go to Stored Position to make the
antenna turn toward the position of the
selected satellite.
6. Select
Store Current Position to save the adjusted position.
7. Select
Recalculate to recalculate the position of the satellite based on one satellite.
Limit Setting
Set the default setting and operation limit for the
motor antenna.
1. Select
Limit Setting.
2. Select
Limit Position to set the limit position
to East or West.
3. Select
Set Limit to move the antenna to East
or West.
4. Select
Reset Position to restore the position
saved at the motor antenna to the factory
default.
Setting Search Options
1. Press the OPT+ button.
2. Set the search options.
Network Search: Search transponders of all
network
Scrambled Search: Free channel, CAS or all
channels
Channel Type: TV, radio or all channels
3. Select OK.