User`s manual

56
Menu On/O Select Conrm Enter 0~9
Installation
1. Select Switch Type and select LNB Only.
2. Select the satellite to congure the satellite
setting options.
 Satellite: Select the satellite. Select User Dene
to enter the options directly.
 LNB Frequency: Set the LNB frequency.
 Test Transponder: Congure the transponder
setting.
3. Select OK.
4. Select
Search and press the OK button.
5. Select
Save and press the OK to save the
results.
Note:
• Select
Stop and press the OK button to stop
the channel search.
• Transponder is activated only when the
satellite has been selected.