User`s manual

English
Menu On/O Select Con rm Enter 0~9
57
Installation
Using DiSEqC Switch
You can either connect to a single satellite (loop though) or two satellites.
When connecting loop through, the speci ed functions
for 2 tuners will be not available.
This connection will allow you to view di erent channels
while recording or record two channels at the same time.
1. Select Switch Type and select DiSEqC.
2. Select the satellite to con gure the satellite
setting options.
 Satellite: Select the satellite. Select User De ne
to enter the options directly.
 LNB Frequency: Set the LNB frequency.
 22kHz Tone: Select On when using two antennas
connected to a 22kHZ tone switch box.
 DiSEqC: Select the DiSEqC switch.
 Test Transponder: Con gure the transponder
setting.
3. Select OK.
4. Con gure the next satellite if you have more
than one satellite.
5. Select Search and press the OK button.
6. Select Save and press the OK to save the
results.
Note:
• Select Stop and press the OK button to stop
the channel search.
• Transponder is activated only when the
satellite has been selected.
DiSEqC 2 x1 Switch
AB
Out
ASTRA 1 19.2E
Single LNB
HOTBIRD 13.0E
Single LNB
DiSEqC 2 x1 Switch
AB
Out Out
ASTRA 1 19.2E HOTBIRD 13.0E