User`s manual

* (%%
Installation menu allows you to configure your antenna and search the available TV and
radio channels. Software update and default setting are also available in this section.
MENU -> Settings -> Installation
Press the RED button and select your antenna
type.
Fixed Antenna - SCD Antenna -
Motor Antenna
  % :$9 '<
MENU -> Setting -> Installation -> Search Channels
1. Select LNB OnlyorDiSEqC.
2. Set the satellite by selecting a satellite
figure and press the OK button.
Satellite: Select the satellite.
LNB Frequency: Select the LNB
frequency.
22kHz Tone: Select On when using a
22kHZ tone switch box.
DiSEqC: Select the DiSEqC switch.
Test Transponder: Check the signal
status of each transponder and select
the one with the best quality.
3. Set the transponder by selecting
Transponder.
* 
 ,