English (HSMM30GB) 10/30/02 10:06 AM Page 53
English (HSMM30GB) 10/30/02 10:05 AM Page 3 Contents Safety ................................................................... GB1 Copyright ............................................................. GB2 Glossary .............................................................. GB3 Reference ............................................................ GB4 ~ GB5 STB Connections ................................................. GB6 ~ GB10 Remote Control Unit ............................................
English (HSMM30GB) 10/30/02 10:05 AM Page 4 Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. : 90 - 250V AC 50/60Hz : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus.
English (HSMM30GB) 10/30/02 10:05 AM Page 5 Copyright Copyright • • • • • VIACCESSTM is a trademark of France Telecom. CryptoWorks(TM) is a trademark of Philips Electronics N.V. Irdeto is a trademark of Mindport BV. Nagravision is a registered trademark of Kudelski S.A. Conax is a trademark of Telenor Conax AS. Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial software.
English (HSMM30GB) 10/30/02 10:05 AM Page 6 Glossary Glossary • Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna. • Forward Error Correction(FEC) A system of error control for data transmission. • Frequency The number of cycles or events per one second, which is expressed in the unit of Hertz(Hz). • Intermediate Frequency(IF) A frequency to which a carrier frequency is shifted as an intermediate step in transmission or reception.
English (HSMM30GB) 10/30/02 10:05 AM Page 7 Reference 1. Connect DiSEqC 1.0 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously. If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. 2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of the DiSEqC switch.
English (HSMM30GB) 10/30/02 10:05 AM Page 8 Reference 5. Software Upgrade HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications. Whenever a problem is found with this software or, in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded. In order to maintain proper performance of the product, it is essential to have the most up to date software.
English (HSMM30GB) 10/30/02 10:06 AM Page 9 STB Connections Front Panel F1-FOX VA-FOX CR-FOX Free-To-Air 1 Smart card 1 Smart card GB6
English (HSMM30GB) 10/30/02 10:06 AM Page 10 STB Connections Front Panel NA-FOX • 1 Smart card , Press to change services down and up. • SMART CARD SLOT Insert a smart card in the slot with the gold chip facing up. Otherwise, it will not operate properly. • ERROR LED(AMBER) Indicates that the STB has an error. • STANDBY LED(RED) Indicates that the STB is under standby. • OPERATING LED(GREEN) Indicates that the STB is operating. • TV/RADIO Press to switch between TV and Radio modes.
English (HSMM30GB) 10/30/02 10:06 AM Page 11 Rear Panel F1-FOX VA-FOX, CR-FOX, NA-FOX • LNB IN Use to connect an antenna. • LNB OUT Use it when connecting to another STB. • RS-232C Use it when connecting to your PC. • TV SCART For the audio/video input of the TV. • VCR SCART For the VCR. • AUDIO OUTPUT Audio signal from your STB to Hi-Fi system.
English (HSMM30GB) 10/30/02 10:06 AM Page 12 STB Connections There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: • The specifications of Rear panel are based on VA-FOX. TV only 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect the coaxial cable from the LNB to the LNB IN socket on the STB. TV with VCR 1.
English (HSMM30GB) 10/30/02 10:06 AM Page 13 • The specifications of Rear panel are based on VA-FOX. TV with VCR and Motorised System(DiSEqC 1.2) 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. 3. Connect the coaxial cable from the LNB of your motorised system(DiSEqC 1.
English (HSMM30GB) 10/30/02 10:06 AM Page 14 Remote Control Unit GB11
English (HSMM30GB) 10/30/02 10:06 AM Page 15 1 NUMERIC BUTTONS Press to select a service, enter your PIN code or Numerics on the menu. 2 INFORMATION(RED) Press to display the programme information box on the screen. This button functions same as the RED button on the menus. 3 SOUNDTRACK(GREEN) Press to display the soundtrack list for the current service. And this button functions same as the GREEN button on the menus.
English (HSMM30GB) 10/30/02 10:06 AM Page 16 Guide of Functions Information Box(I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part.
English (HSMM30GB) 10/30/02 10:06 AM Page 17 Changing Services To change services, do in the following sequence: 1. Press the NUMERIC buttons(0~9) on the remote control unit. 2. Press the buttons or buttons. Or press the RECALL( ), Service-list(OK), EPG( )mode button. To switch between TV and Radio services, press the TV/Radio( )button. To select the previous viewed service, press the RECALL( )button. Volume Control To adjust the volume level, use the buttons or buttons.
English (HSMM30GB) 10/30/02 10:06 AM Page 18 Guide of Functions Teletext Use your TV remote control unit to control the Teletext service. The teletext button doesn’t exist on the STB remote control unit. When the service supports Teletext, the Teletext icon( ) is displayed on the I-plate. Service List The Service List consists of Service All and Service Favourite. On the service list, you can change the attributes of a service though the Service Configuration.
English (HSMM30GB) 10/30/02 10:06 AM Page 19 Guide of Main Menu 1. TV Guide Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services.
English (HSMM30GB) 10/30/02 10:06 AM Page 20 Guide of Main Menu 1. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes.
English (HSMM30GB) 10/30/02 10:06 AM Page 21 Weekly mode Shows the information of programmes that will be played for a week. Select a day you want using the buttons. To watch and reserve a programme you want, do the same steps with the Now/Next mode. Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information Box. Maximum twenty programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name.
English (HSMM30GB) 10/30/02 10:06 AM Page 22 Guide of Main Menu 2. Parental Control You can set a parental guidance rating to each programme in this mode. 1. When the OK button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is 0000 . 2. Enter the PIN code on the display window.
English (HSMM30GB) 10/30/02 10:06 AM Page 23 Language Setting Select the language for menu, audio or subtitle. 1. Select the highlighted language setting using the buttons in the system setting mode and then press the OK button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. 3. Use the buttons to move to a language you want and then press the OK button to finish setting.
English (HSMM30GB) 10/30/02 10:06 AM Page 24 Guide of Main Menu Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode and Sleep Time(standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting. Current Time To set the Current Time, enter the Offset value using the standardised information of current service area.
English (HSMM30GB) 10/30/02 10:06 AM Page 25 A/V Output Setting Video Output(CVBS/S-Video/RGB) Set the video mode for the TV SCART output. Audio Output Set the audio mode which is output from the TV SCART and RCA/Cinch Jack.(Stereo/Mono) Screen Mode Select the aspect ratio of TV which is connected to STB (4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Centre mode as selected.
English (HSMM30GB) 10/30/02 10:06 AM Page 26 Guide of Main Menu Other Setting Select the OSD Transparency and Information Box Display Time. OSD Transparency Select the OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent and opaque. Info. Box Display Time Set the display duration of information box displayed on the screen after changing services. The time ranges from 0 to 20 seconds.
English (HSMM30GB) 10/30/02 10:06 AM Page 27 3-2. Service Organising This menu gives users access to options that allow them to organise their Networks, TV Services and Radio Services. ** The default PIN code is 0000 . Organise TV Services Organise All Services This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. • Delete 1. Press the RED( )button to delete unwanted services. 2. Highlight the services that you want to delete in grey. 3. Press the OK button to confirm. 4.
English (HSMM30GB) 10/30/02 10:06 AM Page 28 Guide of Main Menu • Rename 1. Press the WHITE( )button to change the service name. Then, the keyboard image will be displayed on the screen. 2. Key in the new service name. You can use the four direction keys to move or select the services.
English (HSMM30GB) 10/30/02 10:06 AM Page 29 Organise Radio Services The Organise Radio Services functions same as TV Services except that it uses Radio Services. You can delete or move Radio Services and change the attributes of them. Organise All Services The Organise All Services lets the user Delete, Move, Look, Skip or Rename Radio Services on the All Radio Services list.
English (HSMM30GB) 10/30/02 10:06 AM Page 30 Guide of Main Menu 3-3. Service Searching Enter the PIN code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press the OK button to start Service Search after setting the parameters. ** The default PIN code is 0000 . Antenna Setting Selects the antenna and LNB settings for service search. As you can change the settings for 22KHz Tone and DiSEqC switch, there are 32 possible Antenna Setting for use.
English (HSMM30GB) 10/30/02 10:06 AM Page 31 LNB Frequency 1. Select the L.O. Frequency that is set to antenna. 2. Use the buttons to select the LNB frequency(Universal, 5150, 9750, 10600, 10750, 11475MHz or 0, 1, ......., 9). 3. If the required LNB Frequency is not available, then select “0” and enter the frequency manually using the NUMERIC buttons (0~9). 4. When you select Universal, both 9750 and 10600MHz are supported at the same time. The 22KHz Tone setting is unnecessary.
English (HSMM30GB) 10/30/02 10:06 AM Page 32 Guide of Main Menu • Service Search OSD 1. If you press the EXIT button during the search, then Service Search stops and the searching menu will appear again. 2. When you find all the services, the following picture appears. 3. Before saving it, you can select the services you want to delete. • Found services OSD 1. The picture above shows services that are found after Manual Search. 2. Use the RED( )button to mark the services that you want to delete.
English (HSMM30GB) 10/30/02 10:06 AM Page 33 Manual Search Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder. The bar on bottom of the submenu shows the signal level and signal quality(BER) of the entered parameters. Antenna Alternative Select the target antenna for Manual Search. The Satellite Name helps you select antenna alternatives. This is only for reference and cannot be changed on this menu.
English (HSMM30GB) 10/30/02 10:06 AM Page 34 Guide of Main Menu Network Search • You can select Yes or No. When you select “Yes”, you can find more transponders using the home network. • As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponders besides the transponder that the user inputs. Automatic Skip • You can select Yes or No. When you select “Yes”, the search will skip all scrambled services.
English (HSMM30GB) 10/30/02 10:06 AM Page 35 Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency. Antenna Alternative Select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful in the selection of the antenna, but in this menu you cannot change the Satellite Name.
English (HSMM30GB) 10/30/02 10:06 AM Page 36 Guide of Main Menu 3. Press the RED( )button for confirmation, and you will successfully exit from input mode. If press the OK button at symbol rate value input mode, the value will be confirmed, and if you moves left or right column use the buttons, you can differ values of symbol rate to input. Then press the EXIT and the RED( )button to exit from input mode.
English (HSMM30GB) 10/30/02 10:06 AM Page 37 3-4. Status STB Status Displays the information of H/W Version, S/W Version, Loader Version and so on. Signal Detection Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting. STB Upgrade You can download and upgrade the software of this STB via ASTRA1 satellite when the software of new version is released. Do not turn off the STB during downloading.
English (HSMM30GB) 10/30/02 10:06 AM Page 38 Guide of Main Menu 3-5. Conditional Access For Viaccess Embedded This menu allows the user to view the information on the Smart Card and Viaccess conditional access system such as general Smart Card Information, Service List, Change Maturity Rating, Change PIN code. General Smart Card Information You can see the Unique Address, so user Address, Current Maturity Rating of the Smart Card.
English (HSMM30GB) 10/30/02 10:06 AM Page 39 For CryptoWorks Embedded This menu allows the user to view and change information on the Smart Cards such as available entitlements, Maturity Rating and PIN Code. Besides, you can view the mails from programme providers. General Smart Card Information Card label will be displayed as issuer’s name on the TV screen. Programmes or Bouquets which are encrypted by only CryptoWorks(TM) and distributor labels are displayed on the TV screen.
English (HSMM30GB) 10/30/02 10:06 AM Page 40 Guide of Main Menu PIN Code In this menu you can make PIN Code enabled, disabled or changed. • Enable PIN Code You can enable the PIN Code. • Disable PIN Code You can disable the PIN Code. • Modify PIN Code You can change the PIN Code by using the NUMERIC buttons(0~9) on the RCU. You will need to enter the old PIN Code before you can enter new PIN Code. Mail Box The STB can receive maximum 10 mails from programme providers.
English (HSMM30GB) 10/30/02 10:06 AM Page 41 3-6. Default setting When you press the OK button at the screen, the data of system setting will be changed into the default values and some Free-To-Air services of ASTRA1 will be stored in replacement of all services found. If you press the EXIT button, the function will be cancelled and return the Installation menu. 4. Utility STB supports additional functions such as Calendar and Biorhythm.
English (HSMM30GB) 10/30/02 10:06 AM Page 42 Guide of Main Menu DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites and to search for the services(STAB Rotor Sat motor recommended). 1.
English (HSMM30GB) 10/30/02 10:06 AM Page 43 3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2 and sets the positions of all pre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated. (Please consult the user manual for your motor.) 2. Make sure your receiver is set up to use DiSEqC 1.2. (see section 2 above). 3.
English (HSMM30GB) 10/30/02 10:06 AM Page 44 Motorised System 6. To set the East Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press the OK button to store the current position as your East Limit.
English (HSMM30GB) 10/30/02 10:06 AM Page 45 6. Moving to a pre-set satellite Once you have stored the positions of the satellites you want(see left below) you can now search for the services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search. To do this, you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the Main Menu and press the OK button, to display the Service Searching menu. 2.
English (HSMM30GB) 10/30/02 10:06 AM Page 46 Motorised System 8. Automatic Search It is possible to use automatic search using the DiSEqC 1.2 motorised system. 1. Ensure that the positions for the satellite you want to search is correct.(see Section 3 and 5 above) 2. In the Main Menu, select the option channel searching and press the OK button. 3. In the Service Searching menu, select the Antenna Alternative that you have set for this satellite. 4.
English (HSMM30GB) 10/30/02 10:06 AM Page 47 Troubleshooting Guide GB44
English (HSMM30GB) 10/30/02 10:06 AM Page 48 Menu Map MAIN MENU Delete Satellite NTSC Mode Menu Mode GB45
English (HSMM30GB) 10/30/02 10:06 AM Page 49 Note 2 Note 1 Note 1 : Refer to the instructions on the appropriate menu. Note 2 : F1-FOX models are not applicable.
English (HSMM30GB) 10/30/02 10:06 AM Page 50 Specification Tuner & Channel Input Connector Frequency Range Input Impedance Signal Level IF IF Band width LNB Power & Polarisation 22 KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decode F-type, IEC 169-24, Female 950 MHz to 2150 MHz 75Ω unbalanced -25 to -65 dBm 480 MHz 36 MHz Vertical : +13.5 V Horizontal : +18 V Current : 500 mA Max. Overload Protection Frequency : 22 ± 4 KHz Amplitude : 0.6 ± 0.2 V Version 1.0/1.
English (HSMM30GB) 10/30/02 10:06 AM Page 51 A/V & Data In/Out TV SCART VCR SCART AUDIO R/L RS-232C Video Output(CVBS, RGB, S-Video) Audio Output (Resolution : 20 bits DAC, Max. 2 Vrms) Video Output(CVBS) Video Input(CVBS, RGB, S-Video) Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed)) RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max.
English (HSMM30GB) 10/30/02 10:06 AM Page 52
