product manual H-1336D, H-1346D & H-1356D H-1336_46_56D_man_0609 Marshall Mechanical Compactors
Introduction Humbolt's Standard-Duty, 4-inch automatic compactors ease sample preparation through automatic, mechanical compaction. These compactors can be adjusted to provide a set number of hammer blows and then shut off. All three models include the mechanical compactor, as well as a H-1334B automatic counter, oak pedestal, hammer and mold. The H-1336D is a single-mold configuration, The H-1346D is a dual-mold configuration and the H-1356D provides a triple-mold configuration.
• For Worm Gear Reducers operating in ambient temperatures of 20 degrees to 100 degrees Fahrenheit, use lubricant conforming to A.G.M.A. #7 Compounded. • In addition to lubrication, the unit should have regular inspection to determine the tightness of bolts and screws, misalignment of connected shafts, oil leakage, excessive heating or any unusual noise or vibration. Approved Lubricants Worm Gears A.G.M.A. #7 Compounded Maunfacturer Chevron Oil Co. Cylinder Oil 460X Gulf Oil Co.
H-1336D
H-1346D
H-1356D
Hammer Replacement Parts Description H-1338.29 H-1338.40 H-1338.40.1 H-1338.28 H-1338.30 Model Clevis pin with screw H-1338.29 Locator guide H-1338.25 Hex head bolt H-1338.25.1 Washer H-1338.25.2 Nut H-1338.25.3 Spacer H-1338.25.4 Hammer handle H-1338.40A Complete lift catch assembly Spring pin Hammer rod Key H-1338.28.1 H-1338.31 H-1338.37 H-1338.36 H-1338.26 H-1338.26.1 H-1338.27 H-1338.27.1 Hammer weight (complete) H-1338.32 Plug H-1338.33 Spring H-1338.
Warranty Humboldt Mfg. Co. warrants its products to be free from defects in material or workmanship. The exclusive remedy for this warranty is Humboldt Mfg. Co., factory replacement of any part or parts of such product, for the warranty of this product please refer to Humboldt Mfg. Co. catalog on Terms and Conditions of Sale. The purchaser is responsible for the transportation charges. Humboldt Mfg. Co.