05.
Introduction Compact all-metal soil processor allows customer to produce five-point moisture density relationship test results in about 5 hours. Processor also handles samples for rapid compaction of a family of curves test. Processes up to 30 lbs. of lean-to-fat and tough clays at field moisture in fewer than 15 minutes. Automatically separates and retains up to 3/4" rocks from soil to prolong screen life. Processes soil to pass a No. 4 screen.
Operating Instructions 1. Be sure that the Automatic Kill Switch (H-4215.50) is properly set before starting the machine. 2. Detach weight from the Pressure Plate Arm (H-4215.3.4). 3. Release Catch (H-4215.3.12) on the Pressure Plate Guide and open the material container space. 4. Be sure the Guard, (H-4215.9), is in place. 5. Both Switches (H-4215.50.1), must be correctly set to start the test. The yellow guard switch has to be closed and the pressure plate switch has to be open. 6.
. If the machine is not used constantly, let the material dry on the screen. Then start the machine and tap the screen with the rubber mallet. 5. Wipe all parts which come in contact with the processed material, with a damp cloth containing light oil. This will prevent the material from sticking but will not affect the test results. Accessory Parts for Screen Replacement (6) 114-20 Flat head screen-retaining screws and nuts. (4) 1I4" Hex-head screen-retaining strip screws. (1) Screen: H-4215.
H-4215 Parts
H-4215 Additional Parts
Warranty Humboldt Mfg. Co. warrants its products to be free from defects in material or workmanship. The exclusive remedy for this warranty is Humboldt Mfg. Co., factory replacement of any part or parts of such product, for the warranty of this product please refer to Humboldt Mfg. Co. catalog on Terms and Conditions of Sale. The purchaser is responsible for the transportation charges. Humboldt Mfg. Co.
