Manual

Humboldt Calibration Instrumentation Chart

Load Cell Part# English Gain Metric Gain

(divisions) (divisions)

10,000 lb. (50kN) HM-2300.100 10000 4 5000 4

5,000 lb. (25kN) HM-2300.050 5000 2 2500 4

2,000 lb. (10kN) HM-2300.020 20000 8 10000 4

1,000 lb. (5kN) HM-2300.010 10000 4 5000 4

500 lb. (2.5kN) HM-2300.005 5000 4 2500 4

LVDT Transducer

0.4" (10.0mm) HM-2310.04 4000 2 10000 2

1.0" (25.4mm) HM-2310.10 1000 1 25000 2

2.0" (50.8mm) HM-2310.20 2000 1 50000 4

Pore Pressure

100psi (1000kPa) HM-2300.100 1000 1 1000 1

Device ID

Factory set device ID to 1, if multiple units are connect to a single computer

a unique device ID for each unit has to be establish for the computer to

recognize the correct instrumentation and the correct motors.

To set the Device ID the HM-3000 will use, press until you see this

screen:

Press

you will see this screen:

Press

you will see this screen:

* REVIEW LAST TEST

* RUN TEST

* MORE SETUP

* ENGINEERING SETUP

* SENSOR LIMITS OFF

* RAW_DATA

* MORE SETUP