Manual

30
Once the load cell has reached its peak load and fallen 2%, the HM-3000 will
stop collecting data and reverse the platen to its down position at the fast
rate 2.0 in/min (50.8mm/min). The peak load will be displayed.
You should see this screen:
Peakvaluesareshownonthersttwolines.Toreviewallthedata,
press
(REVIEWDATA).Youshouldseethisscreen:
Pressing (PRINTDATA)willprintthedatatoaprinterorsaveale
in ASCII mode to your computer using Humboldt Material testing Soft-
ware(HMTS)orWindowsHyperterminal.Oncethedatahasbeenprinted
or transferred, you can begin another test after you have loaded another
sample and raised the head to the start position, close to the load cell. by
pressing
(RUNTEST).
If you don’t have a printer or a computer connected to the HM-3000, you
can press
(SCROLL DATA) to scroll the data. You should see this
screen:
Using the
(NEXT)keytoscrollthroughthereadings.
To return to any prior screen you can always press
LOAD 1 PEAK “#”
DISP 1 PEAK “#”
* REVIEW DATA
* RUN TEST
* PRINT DATA
* SCROLL DATA
* RUN TEST
LOAD 1 VALUE
DISP 1 VALUE
* NEXT READING 1