Product Manual B

Spec Hi-performance, Hi-reliability
Version: VA.0 1500 SERIES
Page: 3 of 6
SAVE THESE INSTRUCTIONS
This unit is designed for INDOOR installation ONLY. Never operate the unit outside without the
proper NEMA enclosure.
Electrical Hazards
All units covered by this manual produce dangerous electrical voltages that can cause fatal
electrical shock. Utility and battery power delivers extremely high and dangerous voltages when
installed, as does the HUMLESS unit when it is in operation. Avoid contact with bare wires,
terminals, connections, etc. while the unit is running. Ensure all appropriate covers, guards and
barriers are in place, secured and/or locked before operating the unit. If work must be done
around an operating unit, stand on an insulated, dry surface to reduce potential shock hazard.
Do not handle any kind of electrical device while standing in water, while barefoot, or while hands
or feet are wet. DANGEROUS ELECTRICAL SHOCK MAY RESULT.
To prevent injury, before working on this unit (for inspection, service or maintenance), always put
the unit into the OFF mode.
In case of accident caused by electric shock, immediately shut down the source of electrical
power. If this is not possible, attempt to free the victim from the live conductor. AVOID DIRECT
CONTACT WITH THE VICTIM. Use a non-conducting implement, such as a dry rope or board, to
free the victim from the live conductor. If the victim is unconscious, apply first aid and get
immediate medical help.
Never wear jewelry when working on this equipment. Jewelry can conduct electricity resulting in
electric shock.
Fire Hazard
For fire safety, the generator must be installed and maintained properly. Installation MUST
always comply with applicable codes, standards, laws, regulations and product Installation
Manual guidelines. Adhere strictly to local, state, and national electrical and building codes.
Comply with regulations the Occupational Safety and Health Administration (OSHA) has
established. Also, ensure that the unit is installed in accordance with the manufacturer’s
instructions and recommendations. Following proper installation, do nothing that might alter a