Datasheet

ManualsBrandsHummel ManualsCircular ConnectorsStraight Connector, Female Thread, 10 Poles, 8A, 160VAC

incLusive

Setting Standards

Connectors M 16

Summary of content (26 pages)

PAGE 1
Setting Standards Connectors M 16 incLu sive 15
PAGE 2
Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Dimensions and specifications may be changed without prior notice
PAGE 3
Technical Data M 16 Control Signal Connectors Mechanical Data Materials and Technical Data Housing Copper-Zinc alloy Die Cast Housing surface Nickel plated other surface upon request Inserts (for contacts) Thermoplastic Polyamid PA 6 (Nylon 6/6), PBT Contacts Brass Alloy Contact surface at point of contact Nickel and gold plated (0,25μm Au) Fire protection class V-0 Minimum mating cycles > 1000 Seals / O-Rings Buna-N standard, optional Viton® (Viton is a registered trademark of DuPont) Tem
PAGE 4
Connectors M 16 / Housing Straight Connector, Female Thread / elongated * Cable-Ø elongated 3 – 6 mm (.11 – .23“).........7.810.300.000 5 – 9 mm (.20 – .35“).........7.810.400.000 8 – 11 mm (.31 – .43“).......7.810.500.000 Ø 51,2 18 Ø 19,7 Ø 19,7 46,2 18 18 Part Number 18 * elongated 3 – 6 mm (.11 – .23“).........7.811.300.000 5 – 9 mm (.20 – .35“).........7.811.400.000 8 – 11 mm (.31 – .43“).......7.811.500.
PAGE 5
Connectors M 16 / Housing Cable-Ø Panel Connector with built in Cable Strain Relief Part Number Rear mounting, single hole mounted 2 – 7 mm (.08 – .28“).........7.852.300.000 5 – 9 mm (.20 – .35“).........7.852.400.000 46,2 M 16 x 0,75 20,3 Including jam nut PG 11 15 22 Panel hole 21 Ø 18,6 + 0,1 Contacts and inserts page 22 • Assembly instructions page 35 / 36 Cable-Ø Panel Connector with built in Cable Strain Relief Part Number Rear mounting, M 2,5 x 4 single hole mounted 2 – 7 mm (.
PAGE 6
Connectors M 16 / Housing Right Angle Panel Connector, Male Thread, rotatable 31,7 28,5 M 16 x 0,75 41,2 36,5 Type 25 19,8 20 15 Ø 2,7 Ø 2,7 300° rotatable, locking screw at flange 4 x holes Ø 2,7 mm (.11“) ..7.843.000.000 Flange 20 x 20 mm 4 x holes Ø 2,7 mm............7.843.100.
PAGE 7
Connectors M 16 / Housing Type TWINTUS Part Number Flange 20 x 20 mm Uncoated ..........................7.848.000.000 Surface nickel plated ..........7.848.000.001 Surface black conductive.....7.848.000.00B M 16 x 0,75 18 20 15 38,2 41 15 4 x Ø 2,7 Type Ø Contacts and inserts page 22 • Accessories page 29 • Assembly instructions page 33 22 TWINTUS Part Number Flange 25 x 25 mm Uncoated ..........................7.848.100.000 Surface nickel plated ..........7.848.100.
PAGE 8
Connectors M 16 / Inserts / Pinouts Inserts 3-pole (3 x 1 mm) Type Part Number Part Number Pins Sockets Insert without contacts .......................7.003.903.101.................7.003.903.102 Insert pin mating view Insert with dip solder contacts Length 10 mm ..........................7.001.903.127.................7.001.903.108 Insert with dip solder contacts Length 17 mm ..........................7.001.903.137.................7.001.903.
PAGE 9
Connectors M 16 / Inserts / Pinouts Type Part Number Inserts 4+3+PE Part Number Pins Sockets Insert without contacts .......................7.003.943.101.................7.003.943.102 Insert RAL 2003 (DESINA orange) without contacts .......................7.053.943.101.................7.053.943.102 Insert pin mating view Insert with dip solder contacts Length 10 mm ..........................7.001.943.127.................7.001.943.108 Insert with dip solder contacts Length 17 mm ......................
PAGE 10
Connectors M 16 / Inserts / Pinouts Inserts 6+PE Type Part Number Part Number Pins Sockets Insert without contacts .......................7.003.961.101.................7.003.961.102 Insert pin mating view Insert RAL 2003 (DESINA orange) without contacts .......................7.053.961.101.................7.053.961.102 Insert with dip solder contacts Length 10 mm 1) ........................7.001.961.127.................7.001.961.108 Insert with dip solder contacts Length 17 mm 1) .....................
PAGE 11
Connectors M 16 / Inserts / Pinouts Type Part Number Part Number Inserts 12+3-pole Pins Sockets Insert without contacts .......................7.003.985.101.................7.003.985.102 Insert with dip solder contacts Length 10 mm ..........................7.001.985.127.................7.001.985.108 Insert pin mating view Insert with dip solder contacts Length 17 mm ..........................7.001.985.137.................7.001.985.118 Insert socket mating view Required Contacts 12 x 0,8 mm .......
PAGE 12
Connectors M 16 / Inserts / Pinouts Inserts M 12 for TWINTUS M 16 / M 12 8-pole 2 4 7 6 5 insert pin mating view Inserts M 12 for TWINTUS M 16 / M 12 12-pole 26 6 Type Part Number Pins Insert with solder contacts .........A712-7001912103 2 1 3 10 9 12 8 4 11 5 Part Number Pins Insert with solder contacts .........
PAGE 13
Connectors M 16 / Contacts Type Crimp Range Part Number Contacts Crimp pin 0,8 mm, machined................................0,08 – 0,34 mm2 (AWG 28 – 22) ..7.010.980.801 Crimp socket 0,8 mm, machined................................0,08 – 0,34 mm2 (AWG 28 – 22) ..7.010.980.802 Crimp pin 0,8 mm, machined................................0,08 – 0,34 mm2 (AWG 28 – 22) ..7.010.980.811 Crimp socket 0,8 mm, machined................................0,08 – 0,34 mm2 (AWG 28 – 22) ..7.010.980.
PAGE 14
Connectors M 16 / Contacts Contacts Type Crimp Range Part Number Crimp pin 1,25 mm, machined................................0,5 – 1,5 mm2 (AWG 20 – 16) .....7.010.981.201 Crimp socket 1,25 mm, machined................................0,5 – 1,5 mm2 (AWG 20 – 16) .....7.010.981.202 Crimp pin 1,25 mm, machined................................0,34 – 1,5 mm2 (AWG 20 – 16) ...7.010.981.211 Crimp socket 1,25 mm, machined................................0,34 – 1,5 mm2 (AWG 20 – 16) ...7.010.981.
PAGE 15
Connectors M 16 / Accessories Type Part Number Accessories Plastic protective cap for connectors with male thread .........................................7.000.980.161 for connectors with female thread.......................................7.000.980.162 Brass protective cap for connectors with female thread.......................................7.010.900.163 Brass protective cap for connectors with male thread .........................................7.010.900.
PAGE 16
Connectors M 16 / Accessories Accessories Type Part Number Crimp tool for manual crimping of machined crimp contacts for signal connectors M 16 and M 23 .................................7.000.900.904 See page 84 for crimp tool instructions Adaptor flange for Straight Connectors .....................................................7.010.900.135 Conduit adaptor DN 10 ..............................7.010.900.200 Snapflex 16.......................7.010.900.201 DN 12 ..............................7.010.
PAGE 17
Crimp Tool for Connectors M 16 Crimp Tool Setting for HUMMEL Crimp Contacts (Crimp Tool 7.000.900.904) Cross Section (mm2) Part Number Crimp Contact AWG Crimp Tool Setting mm Locator Setting 7.010.980.801 Crimp pin 0,8 mm 0,08 0,14 0,25 0,34 AWG AWG AWG AWG 28 26 24 22 0,57 0,60 0,64 0,73 10 7.010.980.802 Crimp socket 0,8 mm 0,08 0,14 0,25 0,34 AWG AWG AWG AWG 28 26 24 22 0,57 0,60 0,64 0,73 10 7.010.980.
PAGE 18
Crimp Tool for Connectors M 16 Crimp Tool Setting for HUMMEL Crimp Contacts (Crimp Tool 7.000.900.904) Cross Section (mm2) Part Number Crimp Contact AWG Crimp Tool Setting mm Locator Setting 7.010.901.002 Crimp socket 1 mm (0,34 – 1 mm2) 0,34 0,56 0,75 1,0 AWG AWG AWG AWG 22 20 18 17 0,77 0,82 0,88 0,95 2 7.010.981.201 Crimp pin 1,25 mm 0,5 0,75 1,0 1,5 AWG 20 AWG 18 AWG 17 AWG 16 0,70 0,73 0,79 0,88 2 7.010.981.
PAGE 19
Connectors M 16 / Assembly Instructions TWINTUS 4. 7. 5. 8. 6. 9. 4 mm 1. 2. crimp 3.
PAGE 20
Connectors M 16 / Assembly Instructions TWINTUS M16 / M12 4. 7. 5. 8. 6. 9. 4 mm 1. 2. crimp 3.
PAGE 21
Connectors M 16 / Assembly Instructions Female Threaded Connector / Male Threaded Connector 1. 20 m m 2. 4 mm 3. crimp click 4. 5. 6. 7.
PAGE 22
Connectors M 16 / Assembly Instructions Female Threaded Connector / Male Threaded Connector 12 + 3 1. max. 25 mm 2. 4 mm 3. click crimp 4. click 5. 7. 6. 8.
PAGE 23
Connectors M 16 / Assembly Instructions Right angle connector with positioning 1. max. 30 mm 2. 3. m 4m 4. crimp 7. 8. 17 cli ck 5. 6.
PAGE 24
Connectors M 16 / Assembly Instructions Panel Connector 1. 4 mm 2. crimp click 3. code 4.
PAGE 25
Connectors M 16 / Assembly Instructions Right Angle Panel Connector 4. 5. 4 mm 1. 6. 2. crimp SW 2 7. click 3.
PAGE 26
Crimping, Assembly and Disassembly of Contacts Crimping, Assembly and Disassembly of Contacts Crimping - Remove conductor insulation 4 mm (.16“) max.