Manualshelf

User Manual

ManualsBrandsHumminbird ManualsCar & Vehicle ElectronicsHumminbird 410210-1 Helix 5 Chirp GPS G2 Fish Finder
131132133134135136137138139140
132
Chart Overview
SELECT A MAP SOURCE
T
he HELIX control head includes built-in maps, including the Humminbird Basemap and Contour XD. You can also install a microSD
o
r SD map card with additional chart information for a particular location (separate purchase required). See HELIX Control Head
f
or compatibility details.
NOTE: Your control head may require a software update to display the Humminbird Basemap. See Update Software and visit our
Web site at humminbird.com for more information.
Install a microSD or SD Map Card
When you install a microSD or SD map card, the control head automatically chooses the best map to display. You can also change
the map source manually. If your control head has two cards installed, you can choose which map source you want to use (HELIX
9, 10, 12 only).
1. Install a microSD or SD map card into the control head card slot. See HELIX Control Head for compatibility details.
NOTE: Do not leave the card slot cover open. The slot cover should always be closed to prevent water damage to the unit.
Change the Map Source
When you install a microSD or SD map card, the map source is changed automatically to match the microSD or SD map card map
source. You can also change the map source manually.
When you change the map source, the available views and menus for the chart views also change, allowing you to add navigation
data, shading, alarms, and more.
1. Main Menu: Press the MENU key twice. Select the Chart tab.
2. Select Map Source.
3. Select the installed map card location or a built-in map.
Auto: The best available map will be selected automatically.
Change Map Options
Change the Map Coordinate System (optional, Contour XD and Navionics map cards only)
Use Map Datum to change the map coordinate system used by the control head to match those of a paper map. Almost all electronic
charts use the WGS84 Map Datum and most likely do not require a setting change. (Default = WGS84)
1. Main Menu (Advanced User Mode): Press the MENU key twice. Select the Chart tab.
2. Select Map Datum.
3. Press the RIGHT or LEFT Cursor keys to change the setting.
Chart/Chart Combo View
(Map Source: Contour XD)
Chart View
(Map Source: Humminbird Basemap)