Manualshelf

User Manual

ManualsBrandsHumminbird ManualsCar & Vehicle ElectronicsHumminbird 410210-1 Helix 5 Chirp GPS G2 Fish Finder
11121314151617181920
16
Getting Started
Change Units of Measurement
Use the instructions in this section to change the units of measurement format. You can also change the time and date format,
language, and installation offsets from this menu. See Manage your Control Head for more information.
1
. Main Menu: Press the MENU key twice.
2. Select the Setup tab.
3. Select Units - Depth, Units - Distance, etc., and select each unit setting as needed.
4. Close: Press the EXIT key.
Reset the Triplog
The Triplog includes the timer for elapsed time, distance traveled since last reset, and average speed. Use the following instructions
to reset the triplog. To display the Triplog as a digital readout, see Views: Display Digital Readouts.
1. Main Menu: Press the MENU key twice.
2. Select the Setup tab.
3. Select Triplog Reset.
4. Press the RIGHT Cursor key.
5. Follow the on-screen prompts.
Turn on/off Sounds
Use the instructions in this section to choose the category of sounds you want to hear from your control head.
1. Main Menu: Press the MENU key twice.
2. Select the Setup tab.
3. Select Sound Control.
4. Select All Sounds or Alarms Only.
To receive a sound alert from an alarm, Sound Control must be set to All Sounds or Alarms Only.
Change the Alarm Tone: Select the Alarms tab > Alarm Tone.
Change the User Mode
The User Mode determines how many menu options are displayed in the menu system. Select Normal to see fewer menu options
that are used more often. Select Advanced to see all the menu options available in the menu system.
Instructions in this manual marked with Main Menu (Advanced User Mode) indicate that the menu system User Mode must be set
to Advanced for the selected menu to be shown. If you do not see the menu in the system, change the User Mode to Advanced. See
Menu System Overview for details.
1. Main Menu: Press the MENU key twice.
2. Select the Setup tab.
3. Select User Mode.
4. Select Normal or Advanced.
Set up Sonar
If you’ve installed an accessory transducer, or to refine your sonar settings or turn on/off Ice Fishing Mode, see Set up Sonar for
details.