User Manual

172
Search
Search for Contour Depth
1
. Use the Cursor Control key to move the cursor to a contour on the chart.
2. Press the CHECK/INFO key.
Search for a Lake
Use this menu to display a lake other than your current location. The lake map displayed on the Chart View is based on the GPS
latitude/longitude position and the Humminbird LakeMaster map card installed in the control head. GPS reception is required for
the correct lake to be displayed.
The Lake List menu option allows you to display a different lake from the installed map card. When you select a lake, the cursor will
move to the lake so you can see it on the Chart View. Then, you can mark waypoints, press the GOTO key to start navigation toward
a waypoint, or press the CHECK/INFO key for more information.
No GPS Reception: If you don’t have a GPS Fix, you can view the lake in Simulator mode. When you power on the control head, press the
MENU key. Select Simulator from the Start-Up Options Menu. You can mark waypoints and routes and save them in Simulator mode.
NOTE: A Humminbird LakeMaster map card must be installed to enable this feature.
Search for a Lake
1. Main Menu: Press the MENU key twice. Select the HB Chart tab.
2. Select Lake List.
3. Press the RIGHT Cursor key.
Sort By: Select the Sort By field, and press the RIGHT or LEFT Cursor keys to select a sort option for the list. You can sort
alphabetically, identify the high-definition lakes (Hi-Def) on your card, etc.
Scroll: Press the UP or DOWN Cursor keys to scroll through the list. As each lake is highlighted, you can view information about
the lake in the box displayed on the screen.
Cursor To: Select a lake on the list. Press the RIGHT Cursor key.
Selecting a Lake to Display
selected lake
information
about the
selected lake