User Manual

76
Circular Flasher
DISPLAY THE CIRCULAR FLASHER VIEW ON-SCREEN
(ICE HELIX CHIRP AND HELIX 5 AND 7 G2/G2N MODELS ONLY)
Circular Flasher View provides two ways to view sonar data in traditional flasher format. The view is available on ICE HELIX CHIRP
models and compatible HELIX 5 and 7 G2/G2N models with Ice Fishing mode turned on. To enable Ice Fishing mode, see the
instructions below.
Turn on Ice Fishing Mode
If you have an ICE HELIX CHIRP model, proceed to Display the Circular Flasher View.
1. Preparation: Confirm your control head software is up to date. See Update Software.
2. Main Menu: Press the MENU key twice. Select the Sonar tab.
3 Select Ice Fishing.
4. Press the RIGHT Cursor key.
The control head will automatically restart.
To return to Open Water mode, repeat step 2 and select Open Water.
Display the Circular Flasher View
1. Press and hold the VIEW key.
2. Select Sonar > Circular Flasher View.
Select the Digital Depth Source (DI, CHIRP DI models only)
If you connect an ice transducer to the HELIX DI G2, HELIX CHIRP DI G2, or HELIX CHIRP DI GPS G2/G2N control head, set the Digital
Depth Source to 2D Element. See Set up Sonar for details.
1. Main Menu (Advanced User Mode): Press the MENU key twice. Select the Sonar tab.
2. Select Digital Depth Source.
3. Select 2D Element.
Circular Flasher View with CHIRP IR Turned On
(CHIRP models only)
Circular Flasher View
(HELIX models without CHIRP)