Use and Care Manual

138
AutoChart Live
Adjust the Gain Offset
Use Gain Offset to tune the vegetation display. Vegetation will vary with the lake, season, or environment you are fishing, and you
should adjust the Gain Offset as needed.
1. From the AutoChart Live menu, select Vegetation Options.
2. Select Gain Offset.
3. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
Adjust the Vegetation Range
You can adjust the range of vegetation shown on the chart by changing the minimum range and maximum range on the display.
The range you select affects how the vegetation colors are displayed.
1. From the AutoChart Live menu, select Vegetation Options.
2. Select Min Vegetation. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
3. Select Max Vegetation. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
NOTE: Use the AC Live Color Bar icon see the selected palette and, from left to right, the AutoChart Live depth range (low to high),
Bottom Hardness range (soft to hard), or Vegetation range (soft to hard).
Adjusting the Vegetation Hardness Range
(Map Source: Humminbird)
A
C
L
i
v
e
C
o
l
o
r
B
a
r