Use and Care Manual

164

EBL/VRM

se EBL (Electronic Bearing Range) and VRM (Variable Range Ring) to measure the distance and bearing between any two targets

n the Radar View.

The EBL and VRM can be set as a pair, and you can set two pairs. The marker is tied to the center of the vessel. As the vessel’s

position and heading move, the EBL/VRM also moves.

This menu is available in Custom Mode (see The Menu System: Change the User Mode).

Create an EBL/VRM

1. With a Radar View displayed on-screen, tap Radar in the status bar.

Press the MENU key.

2. Select EBL/VRM.

3. Select EBL/VRM, and turn it on.

4. Select Adjust.

5. Use the Joystick to move the cursor until it is positioned over the chosen EBL/VRM intersection.

6. Press the ENTER key.

Select a Position Enter

Setting the EBL/VRM

VRM

EBL

cursor positioned

over EBL/VRM

intersection

EBL/VRM digital readout overlay turned on

closeenter