Use and Care Manual

202

2D Sonar

hange the SwitchFire Mode

SwitchFire controls how the sonar returns are displayed in the view.

1. With a 2D Sonar View displayed on-screen, tap Sonar (2D) in the status bar, or press the MENU key once.

2. Select SwitchFire.

3. Select Clear Mode or Max Mode.

QUICK TIP! This setting can also be changed in the status bar menu. See the illustrations above.

SwitchFire: Clear Mode SwitchFire: Max Mode

Choose Clear Mode to see less clutter and more fish size accuracy on the display.

When Clear Mode is selected, the clutter is filtered, and sonar returns are

interpreted to provide more details about the objects within the transducer beam,

regardless of their location. In other words, a large arch on the display means a

large fish has been detected.

Choose Max Mode to see only raw sonar returns on the display. When Max Mode

is selected, you will see the maximum sonar information available within the

transducer beam, so more fish arches and better jig tracking are shown.

Tap to open the SwitchFire menu in the status bar. Tap to open the SwitchFire menu in the status bar.