Use and Care Manual

Radar Configuration

CONFIGURE HUMMINBIRD RADAR (IN

STALLATION AND

PAIR

)

he instructions in this section apply to the following Humminbird radar models only:

• RH 5

• RH 44

• AS 21RD4KW

• AS 12RD2KW

NOTE: The instructions in this section do not apply to the Humminbird CHIRP radar.

Radar Configuration

The radar should be conﬁgured by a qualiﬁed radar technician after installation or equipment repair. The settings in this section

should only be needed periodically. We recommend that you contact Humminbird Customer Service at 1-800-633-1468 before

using the menus in this section.

WARNING! The features in this section affect the performance of the radar and should only be adjusted by a qualified radar

technician.

CAUTION! Before the radar settings are adjusted, or before the SOLIX software are updated or restored to system defaults, export

the radar installation settings. See Export Radar Installation Settings.

Open the Radar Installation Menu

1. Press the HOME key.

2. Select Settings.

3. Select Radar > Installation.

Trigger Delay

Trigger delay adjusts the signal timing so that long straight targets appear straight on the display. The Range and Rain Clutter

(FTC) are temporarily adjusted to optimize the system settings. When the Trigger Delay installation setting is completed, the system

will return to the previous user settings.

1. Select Trigger Delay from the Installation menu.

2. Trigger Delay: Press and hold the slider, or press and hold the ENTER key, to adjust the trigger delay. A high setting sets a

longer delay, while a low setting sets the radar to a shorter delay.

Radar Installation Menu

preview

window

options