User Manual

Bronze Thru-Hull Transducer
5
530513-2_C
Returning Your Unit for Service
Before sending your unit in for repair, please contact the factory, either by
phone or by email, to obtain a Repair Authorization Number for your unit.
NOTE: Please do not return your Humminbird® to the store for service.
Please have your product model name and serial number available
before calling the factory. If you contact the factory by e-mail, please
include your product model name and serial number in the e-mail, and
use Request for Repair Authorization Number for your e-mail subject
header. You should include your Repair Authorization Number in all
subsequent communications about your unit.
For IN-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from the Humminbird®
Customer Resource Center.
• Tag product with your name, street address, phone number and
your assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Include a copy of your receipt (to show proof and date of purchase).
• Return product freight prepaid to Humminbird®, using an insured
carrier with delivery confirmation.
For OUT-OF-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from the Humminbird®
Customer Resource Center.
• Include payment in the form of credit card number and expiration
date, money order or personal check. Please do not send cash.
• Tag product with your name, street address, phone number and
your assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Return product freight prepaid to Humminbird®, using an insured
carrier with delivery confirmation.
Contact Humminbird®
Contact the Humminbird® Customer Resource Center
in any of the following ways:
By Telephone
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):
1-800-633-1468
By e-mail
(typically we respond to your e-mail within three business days):
[e-mail]
For direct shipping, our address is:
Humminbird
Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
WARNING! Do not touch an active transducer during operation, as this
may cause physical discomfort and may result in personal injury in the form
of tissue damage. Handle the transducer only when the power to the
fishfinder is off.
WARNING! This device should not be used as a navigational aid to
prevent collision, grounding, boat damage, or personal injury. When the
boat is moving, water depth may change too quickly to allow time for you
to react. Always operate the boat at very slow speeds if you suspect
shallow water or submerged objects.
WARNING! Disassembly and repair of this electronic unit should only be
performed by authorized service personnel. Any modification of the serial
number or attempt to repair the original equipment or accessories by
unauthorized individuals will void the warranty. Handling and/or opening
this unit may result in exposure to lead, in the form of solder.
WARNING! This product contains lead, a chemical known to the state of
California to cause cancer, birth defects and other reproductive harm.
The WEEE Directive aims to minimize the impact of end-of-life
electrical and electronic equipment on human health and the
environment. Therefore, any product bearing the WEEE symbol
must not be included with unsorted municipal waste. Instead, it
must be separately collected, treated and recycled.
For proper disposal of this equipment, please contact the Johnson Outdoors
distributor or see
www.humminbird.com.
© 2008 Humminbird®, Eufaula AL, USA.
All rights reserved.
Bronze Thru-Hull Transducer
1
530513-2_C
Thank You
Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation
by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird®
accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product.
Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely
event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge
during the first year after purchase, and available at a reasonable rate after the one-year period. For
complete details, see the Warranty section included in this manual.
Contact our Customer Resource Center at either
1-800-633-1468 or visit our website at www.humminbird.com.
Installation Overview
Following are instructions for the installation of this accessory. Before you start installation, we encourage
you to read these instructions carefully in order to get the full benefit from your Humminbird® accessory.
If you find that any items are missing from your installation kit, call our Customer Resource Center at
1-800-633-1468 or visit our website at www.humminbird.com.
NOTE: This type of transducer installation is not recommended for trailerable boats.
NOTE: This transducer requires drilling a hole in the hull of the boat; therefore, installation should be performed
by a qualified marine technician.
In addition to the hardware supplied with your transducer, you will need a drill, a small drill bit for a pilot
hole, a hole saw to fit the threaded stem of the transducer, a large adjustable wrench, a level, and marine-
grade silicone sealant.
Installation
Perform the procedures in the following sections to install the transducer on your boat.
1. Testing the Transducer Prior to Installation
Prior to installation, test the transducer to make sure that no damage occurred during shipping.
1. After connecting the transducer to the fishfinder, hold the transducer in the water over the side of the boat
to confirm proper operation. If the transducer is working properly, you should be able to see the bottom on
the control head display. The bottom image should be relatively strong and there should be detailed structure
on the display.
2. Locating the Transducer Mounting Position
Outside the boat, the best location for the transducer will be aft midship, as close to the centerline of the
boat as possible. The transducer should be mounted forward of the propellers on inboard boats, and
separated adequately from other transducers, strakes, rivet lines, or other protrusions. Make sure that there
is nothing in front, behind, or to the side of the transducer that is closer than 12".
Inside the boat, there must be room to access the mounting location for installation and cable routing.
© 2008 Humminbird®, Eufaula AL, USA.
All rights reserved.
Thru-Hull Installation
Deadrise Angle
Areas of Possible Turbulence
Rivets Strakes
Transom Hull
Preferred Mounting Location
38624_Install_530513-2_C 5/8/08 4:50 PM Page 1