www.reelschematic.com www.reelschematic.
www.reelschematic.com www.reelschematic.com THANK YOU Thank you for choosing Humminbird®, America's#1 name in fishfinders. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird is designed for trouble-free use in even the harshest marine environment.
www.reelschematic.com www.reelschematic.com TABLE OF CONTENTS Section 1: USING The Legend 2000 Series . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Deep Models Additional Performance . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Powering Up the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Simulator and Feature Memory . . . . . . . . . . . . . . . . . . .
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES PERFORMANCE / SIMULATOR / POWERING UP THE UNIT Powering Up the Unit After installation, turn the LEGEND 2000 SERIES on by momentarily pressing the GAIN knob. An audible chirp sounds as the unit turns on. If the unit detects that the transducer is connected and is in water, the LEGEND 2000 SERIES begins to show sonar information on the display. If the transducer is not detected, the unit starts up in SIMULATOR mode.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES USER INTERFACE / KNOBS / LCD DISPLAY USER INTERFACE The LEGEND 2000 SERIES User Interface is made up of the following components: knobs and the LCD Display, which in turn is made up of the RTS (Real Time Sonar™) and the Chart Windows. Push ON / OFF Knobs Three knobs on the LEGEND 2000 SERIES control all user settings: GAIN, CONTROL PANEL and RANGE.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES REAL TIME SONAR™ / CHART WINDOW The sonar returns received by the LEGEND 2000 SERIES are displayed along the depth range scale in a REAL TIME SONAR™ (RTS) WINDOW and CHART WINDOW. The RTS WINDOW displays new sonar information within the transducer cone in an expanded, easy-to-see format; the CHART WINDOW logs old RTS WINDOW information to show a contour view of the bottom and structure.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES CHART WINDOW / BOTTOMS / FISH APPEARANCE Thermocline Slope A thermocline typically appears as a continuous band of many gray levels moving across the display at the same depth. Thermoclines always appear above the bottom. Second Return Bait fish Fish Arch Sloped Bottoms Bottoms having a large degree of slope also present a unique picture. These generally have a thicker black band representing the bottom directly under the boat.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES SONAR VIEWS / CONTROL PANELS Sonar Views (Deep Models Only) The dual beam (50/200kHz) sonar information can be displayed in several different views in the CHART WINDOW. In the 200kHz view, only the sonar returns and FISH ID from the 200kHz beam are displayed. Typically, the 200kHz information provides greater bottom detail up to 800' and works well while the boat is in motion.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES MODES OF OPERATION / OPTIMIZING THE DISPLAY Optimizing the Depth Range for Sonar Targets When the image of the bottom does not appear close to the bottom of the LCD display, the Legend 2000 Series is not fully optimizing the display to show sonar targets, such as fish, that are very close together.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES BOTTOM LOCK ZOOM MODE / MANUAL MODE To change the area of the bottom being zoomed, follow these steps: To adjust the depth ranges manually, follow these steps: 1. Make sure the LEGEND 2000 SERIES is operating in BTM LOCK (Bottom Lock) mode. 2. Push the RANGE knob. An adjustment indicator appears by the lower zoom preview bar, indicating this is the selected depth limit for adjustment. 1.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES CHART SPEED / SONAR VIEW / LIGHT / CONTRAST / RTS WINDOW Sonar View SONAR VIEW (Deep Models only) selects the source of the sonar information being displayed. 200kHz displays sonar information and FISH ID from the 200kHz beam only. 50kHz displays sonar information and FISH ID from the 50kHz beam only. SPLIT SCREEN presents the sonar information from the 200kHz and 50kHz beams simultaneously in side-byside windows.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES SURFACE CLUTTER / WHITE LINE / FILTER / DEPTH ALARM / TEMP ALARM White Line WHITE LINE activates and adjusts a feature which changes how the LEGEND 2000 SERIES draws the bottom contour and structure, and also shows fainter sonar returns more clearly.
www.reelschematic.com www.reelschematic.com USING THE LEGEND 2000 SERIES UPPER TEMP / LOWER TEMP / FISH ALARM / FISH SENSITIVITY / FISH ID / SIMULATOR / UNITS UPPER TEMP is the upper temperature boundary for the temperature alarm. The inside temp alarm will sound when the water temperature was initially above the upper temp boundary and then falls below it. The outside temp alarm will sound when the water temperature was initially below the temp boundary and then rises above it.
www.reelschematic.com www.reelschematic.com MAINTENANCE AND WARRANTY CONTROL PANELS / MAINTENANCE/TROUBLESHOOTING UNITS also selects the units of measure for boat speed and depth in one of four additional combinations supported by the International Models only: • METRES/KPH displays depth in metres/speed in kilometres per hour. • METRES/KTS displays depth in metres/speed in nautical miles per hour. • FATHOMS/KTS displays depth in fathoms/speed in nautical miles per hour.
www.reelschematic.com www.reelschematic.com MAINTENANCE AND WARRANTY TROUBLESHOOTING 2. The unit starts up in Simulator mode. The LEGEND 2000 SERIES has the ability to detect that a transducer is connected. If, at power up, a transducer is not connected, the unit starts up in SIMULATOR mode. Ensure that an appropriate transducer connector is used and the connector is positioned correctly in the collector plug. Also, be sure that the collector plug is fully-seated into the unit.
www.reelschematic.com www.reelschematic.com MAINTENANCE AND WARRANTY WARRANTY / SERVICE POLICY TECHSONIC INDUSTRIES, INC. ONE YEAR LIMITED WARRANTY We warrant the original retail purchaser that products made by Techsonic Industries have been manufactured free from defects in materials and workmanship. This warranty is effective for one year from the date of original retail purchase.
www.reelschematic.com www.reelschematic.com CUSTOMER RESOURCE CENTER SERVICE POLICY / SERVICE PROCEDURES For OUT-OF-WARRANTY service, complete the following steps: Returning Your Unit for Service Before sending your unit in for repair, please contact the factory, either by phone or by email, to obtain a Repair Authorization Number for your unit. Please have your product model name and serial number available before calling the factory.
www.reelschematic.com www.reelschematic.com SPECIFICATIONS 2000/2005 SPECIFICATIONS Operating Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 kHz Power Output . . . . . . . . . . . . . . . . . . . . . . .4000 Watts (Peak to Peak) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 Watts (RMS) Area of Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24° at -3 dB Power Requirement . . . . . . . . . . . . . . . . . . . . . . . . . .