Fish Finder User's Manual

• If the transom is behind the propeller(s), it may be impossible to find an
area clear from turbulence, and a different mounting technique or
transducer type should be considered, such as an Inside the Hull
Transducer.
• If you plan to trailer your boat, do not mount the transducer too close to
trailer bunks or rollers to avoid moving or damaging the transducer
during loading and unloading of the boat.
• If high speed operation is critical, you may want to consider using an
In-Hull transducer instead of this Transom Mount transducer.
NOTE: The hydrodynamic shape of your transducer allows it to point straight down
without deadrise adjustment (Figure 12).
NOTE: If you cannot find a transom mount location that will work for your high-speed
application, find an In-Hull Transducer by contacting our Customer Resource Center at
either 1-800-633-1468 or by visiting our website at www.humminbird.com.
Figure 12
Deadrise Angle
15”
Find a turbulence-free location at least 15” from the propeller(s)
and not in line with trailer bunks or rollers. (Figure 11).
Level
10
Transom Transducer Installation