Fish Finder User's Manual
Table Of Contents
- Cover
- About this Manual
- Warnings
- Table of Contents
- Installation Overview
- Transducer Installation Overview
- Inside the Hull Transducer Installation
- Trolling Motor Transducer Installation
- Powering ON and OFF
- What You See On the Display
- PiranhaMAX™ Sonar Technology
- The Menu System
- Maintenance
- Troubleshooting
- International Purchases
- Humminbird® 1-Year Limited Warranty
- Humminbird® Service Policy
- Returning Your Unit for Service
- Specifications
- Contact Humminbird®
Filter
(Setting Saved in Memory)
Press the POWER-MENU key until FILTER appears. Select either Off or On.
Filter adjusts the sonar filter to limit interference on the display from
sources such as your boat engine, turbulence, or other sonar devices.
(On, Off, Default = Off)
SetUp Menu
(Setting Not Saved in Memory)
Press the POWER-MENU key until SetUp appears. Press the RIGHT Arrow key
to select On. (Off, On, Default = Off)
When you activate SetUp, additional menu choices will become available that
are not a part of the Main Menu system. After selecting SetUp, press the
POWER-MENU key to display the SetUp menu choices, one at a time. SetUp
Menu choices include:
• Contrast • Battery Alarm
• Fish ID+
TM
• Language (International only)
• Bottom View • Units (International only).
Scroll through all SetUp menu choices to exit the SetUp menu.
Contrast (SetUp Menu)
(Setting Saved in Memory, Monochrome only)
Make sure that the SetUp menu is selected, then press the POWER-MENU key
until CONTRAST appears. Select a setting from 1 through 5. (1 to 5, Default = 3)
Scroll through all SetUp menu choices to exit the SetUp menu.
33