Specification Sheet
J9150A
-HN
10GBASE-SR/SW SFP+ 85
0nm, 300m, MMF
Page 1 of 2
J9150A HP Compatible
10Gbase
SFP+
Transceiver
Features
• Supports 10GBASE Ethernet
• Transmission distance up to 300 meters (OM3 MM fiber)
• Hot-Swappable if your device supports
• Lifetime Warranty
• Plugs into SFP+ port
• Industry-standard LC duplex connector
• Compliant to SFP+ Electrical & Mechanical MSA
• Sub watt power consumption: 0.65W (typ.)
• 0°C to +70°C case operating temperature range
• Laser Class 1 IEC / CDRH compliant
• RoHS 6/6 compliant
• Compliant with product safety standards
Product Overview
The Hummingbird Networks 100% HP Compatible J9150A optical transceiver module is for transmission
at 850nm over multimode fiber. It supports Ethernet standards which make it ideally suited for 10G data
communications. It offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data
center, enterprise wiring closet, and service provider transport applications.
Its sub watt power consumption and its excellent EMI performance allow system design with high port
density. The small form factor integrates an 850nm vertical cavity surface emitting laser (VCSEL) in an LC
package and a PIN receiver. Module is lead free, RoHS compliant and is designed and tested in
accordance with industry safety standards.
The Transceivers convert information from electrical to optical format, and back again, at standard data
rates. The transmit path consists of an AC coupled 100 ohm differentially terminated driver coupled to a
highly reliable 850nm VCSEL. The receiver path consists of a ROSA (receiver optical sub-assembly) for
optical electrical conversion, followed by a limiting amplifier to boost the electrical signal. A Loss of Signal
(LOS) status is provided to facilitate easy link detection.
Ordering
Information
Part No. Data Rate Laser Fiber Type Distance
Optical Interface DDMI
J9150A-HN 10Gbps 850nm MMF 300m SR/SW NO
Supported Standards
Application Standard Data Rate
IEEE 802.3ae-2002 10 GBASE-SR 10.3125 GBd