FN-LINK TECHNOLOGY LIMITED FN-LINK TECHNOLOGY LIMITED Office: 6 Floor, Building U6, Junxiang U8 Park, Hangcheng Avenue, Bao'an District, Shenzhen City, CHINA Factory: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA TEL: +86-755-2955-8186 Website: www.fn-link.com Product Specification Project Name 802.11a/b/g/n/ac 2T2R WIFI Module Model NO F12ASUM13-W3 (USB2.
FN-LINK TECHNOLOGY LIMITED CONTENTS 0 REVESION HISTORY.......................................................................................................................................3 0.1 1 2 3 4 5 MODEL NO DEFINITION........................................................................................................................... 3 INTRODUCTIONS............................................................................................................................................
FN-LINK TECHNOLOGY LIMITED 0. Revision History REV NO Date Modifications Approved Draft Rev1.0 2019-09-12 First Released Szs Lxy 0.1 MODEL NO DIFINITION EXAMPLE: F12ASUM13-W3 F 12A S U M 1 3-W 3 Control NO: 0, 1, 2…. Antenna: W External, B Print ANT Voltage: 3 3.3Vdc, 5 5Vdc Product NO: 1, 2, 3…. Product Type: M Module, D Dongle Interface: S SDIO, U USB, E PCI-E IC Version: -VS IC Part NO: RTL8812AU Manufacturer: FN-LINK http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 1. Introduction F12ASUM13-W3 is a highly integrated single-chip MIMO (Multiple In, Multiple Out) Wireless LAN(WLAN) USB2.0 network interface controller complying with the wireless very high throughput IEEE 802.11ac Draft 2.0 and 802.11n specifications. The RTL8812AU provides a complete solution for a high-performance wireless client and also supports WIFI Direct feature that can easily build a WIFI P2P PAN network. 1.
Operating Frequency FN-LINK TECHNOLOGY LIMITED 2.4G: 2412MHz~2462MHz ;2422MHz~2452MHz 5G: 5180MHz-5240MHz ; 5745MHz-5825MHz Host Interface USB2.0 WIFI Standard IEEE802.11a/b/g/n/ac 2.4G/5G At the same time work Non support Modulation PHY Data rates EVM Receiver Sensitivity Bandwidth: 20MHz http://www.fn-link.com 2T2R 802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps) 802.11 a/g: OFDM 802.11n: MCS0-7 802.11ac: MCS0-9 802.11a: 54,48,36,24,18,12,9,6 Mbps 802.11b: 11,5.5,2,1 Mbps 802.
FN-LINK TECHNOLOGY LIMITED Receiver Sensitivity Bandwidth: 40MHz 802.11n 2.4G @10% PER MCS 0 ≤-80dBm MCS 1 ≤-79dBm MCS 2 ≤-77dBm MCS 3 ≤-75dBm MCS 4 ≤-72dBm MCS 5 ≤-68dBm MCS 6 ≤-66dBm MCS 7 ≤-64dBm 802.11n 5G @10% PER MCS 0 ≤-80dBm MCS 1 ≤-79dBm MCS 2 ≤-77dBm MCS 3 ≤-75dBm MCS 4 ≤-72dBm MCS 5 ≤-68dBm MCS 6 ≤-66dBm MCS 7 ≤-64dBm Receiver Sensitivity Bandwidth: 80MHz 802.
FN-LINK TECHNOLOGY LIMITED 3. Mechanical Specification 3.1 Outline Drawing(Unit:±0.15mm) (TOP VIEW) (BOTTOM VIEW) (Top View) http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 3.2 Connector Pin Definition Pin # Name Description 1 PB-P2 WPS Switch (high potential) 2 GND Ground 3 DP USB Data + 4 DM USB Data - 5 3.3VCC 3.3V Power Supply 6 LED External LED control http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 3.3 Typical application circuit 4. Environmental Requirements 4.1 Operating& Storage Conditions Operating Storage MTBF (Mean Time Between Failures) http://www.fn-link.
4.2 Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : ≤2 times FN-LINK TECHNOLOGY LIMITED 4.3 Patch WIFI modules installed before the notice: WIFI module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247,15.407 Antenna info: External antenna Manufacture: SHENZHEN OFEIXIN TECHNOLOGY LIMITED Model: ANT-B2458X-08701 Antenna gain 2.0dBi per antenna Antenna number:2 This device complies with part 15 of the FCC Rules.