VAXIX ATOM 500 User manual Dear users: Thank you very much for choosing ATOM 500
wireless video transmission equipment. This product adopts h.265 image coding and decoding technology and 5g wireless transmission technology.Realize low delay and high quality video transmission. We sincerely hope that you can enjoy the long‐term convenience of using the product and wish you the best experience from the product. All the information contained in this manual has been strictly verified to be correct at the time of publication.
Support mobile APP monitoring and password protection Support HDMI loop out up to 9 free frequency switching options OLED screen display the current channel,powerstatus,signalstength Support USB type C andSony F97 battery power supply, meet the needs of various environments Any input and output ports with ±4 kV ESD protection level (HBM, contact discharge) Application scenario Film shootingEducational recording and broadcasting Live broadcastwedding ceremony Sports eventsEnterprise activity Pa
Cold boot platform*1 Type‐C power cord*1 Hexagon wrench*1
Introduction Thank you for choosing our long-range wireless HDMI products. Before you install the product, please read the user manual carefully and follow the manual of the user manual to avoid product damaged or other safety accidents. Due to product version upgrade or other reasons, the contents of this manual will be updated from time to time.
① Power switch ② Screen display ③ HDMI Output ④ HDMI Input ⑤ Type-C DC Input ⑥ Direction button1 ⑦ Direction button2 ⑧ Menu button ⑨ Installation of extension accessories Receiver: 2
①Power switch ②Screen display ③HDMI Output ④HDMI Output ⑤Type-C DC Input ⑥Direction button1 ⑦Direction button2 ⑧Menu button ⑨Installation of extension accessories ■Parameters: 3
Transmitter Receiver HDMI input(Type A Female), Output(Type A Female),Type-C interface HDMI Output 1(Type A Female), Output 2(Type A Female),Type-C interface Voltage 5V DC 5V DC Power consumption <6.5W <4.5W Size (LxWxH):105x64x28mm (LxWxH):105x64x28mm Mass 134g 130g Input Video Format HDMI: 720p59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59 .94/60; / Output Format / HDMI: 720p59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.
Press the transmitter "direction key" to switch the frequency point, press the menu key to confirm the frequency point, and the receiver will automatically switch the connected frequency point synchronously. No frequency point switching function of receiver. 2. App password modification method Press "menu" key for menu interface, switch to "PWD < current >", click "menu" to confirm, switch to "new", click "menu" to confirm, wait for about 10s.
①App name is "vaxis vision" ,Download in app storeg ②Usage method a. Open app "vaxis vision" to select the connection device b. Long press TX menu key for 3S, switch to SSID, and input WiFi name (VX a00001) to app c. The TX menu is switched to PWD, and the 8-digit number displayed is WiFi password. Input it to app and click Connect. Common troubleshooting 1. Connection exception a. Please check whether TX / RX power supply is normal b.
displayed on the OLED screen 3. Video picture jam a.Please check whether the signal quality displayed by the receiver is good. If the signal is weak, please switch the frequency point or shorten the wireless connection distance b. If it is impossible to determine which channel has low environmental interference, please restart TX and select a cleaner channel for automatic frequency sweep FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules.
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.