Installation Instructions

INSTALLATION
11
Outside Mount — Standard Shades
■
Determine the bracket locations.
➤
Center the ordered width -
1
⁄ 8 " over the window at the desired height and mark its
location.
■
Place the outside edge of each bracket on the previously made marks, then mark each of
the screw holes.
➤
Standard M shades. A minimum 2
1
⁄ 8 " flat vertical surface is required to mount
the brackets.
➤
Standard L shades. A minimum 3" flat vertical surface is required to mount
the brackets.
➤
The top of the installation brackets should be at the desired height of the shade.
■
Drill the screw holes using a
3
⁄ 32 " drill bit for Standard M shades or
1
⁄ 8 " for Standard
L shades.
■
Use a level to check that the mounting surface is level. Shim the brackets
if necessary.
■
Attach the installation brackets using the screws provided.
WARNING: Product is heavy. Mount into wood/metal
studs or into concrete with concrete anchors. Drywall
anchors are not recommended.
Proceed to “STEP 2 — Install the Shade” on page 19.
Left
Bracket
Right
Bracket
Window Opening